User manual ASUS P8Z68-V LX

[. . . ] It can be switched between AGP 2X(3. 3V) or 4X(1. 5V) mode by adjusting the jumper. The factory default for this card is 2X(3. 3V). The GA-8SQ800 Ultra/GA-8SQ800 (or any AGP 4X only) motherboards might not function properly, if you install this card without switching the jumper to 4X(1. 5) mode in it. Example 2: Some ATi Rage 128 Pro graphics cards made by "Power Color", the graphics card manufacturer & some SiS 305 cards, their golden finger is compatible with 2X(3. 3V)/4X(1. 5V) mode AGP slot, but they support 2X(3. 3V) only. [. . . ] (Default v alue) Set IRQ 3, 4, 5, 7, 9, 10, 11, 12, 14, 15 to PCI 2. PCI 3 IRQ Assignment 8Auto 83, 4, 5, 7, 9, 10, 11, 12, 14, 15 Auto assign IRQ to PCI 3. (Default v alue) Set IRQ 3, 4, 5, 7, 9, 10, 11, 12, 14, 15 to PCI 3. - 41 - BIOS Setup English PC Health Status CMOS Setup Utility -Copy right (C) 1984-2002 Aw ard Softw are PC Health Status Reset Case Open Status Case Opened VCORE VCC18 +3. 3V +5V +12V Current CPU Temperature Current CPU FAN Speed Current Sy stem FAN Speed CPU Warning Temperature CPU FAN Fail Warning Sy stem FAN Fail Warning [Disabled] No 1. 778V 1. 856V 3. 2V 4. 945V 12. 288V 49°C 5113 RPM 0 RPM [Disabled] [Disabled] [Disabled] [Enabled] Clear case open status at nex t boot Item Help Menu Lev el u [Disabled] Don' reset case t open status higf: Mov e Enter:Select +/-/PU/PD:Value F10:Sav e ESC:Ex it F1:General Help F5:Prev ious Values F6:Fail-Safe Defaults F7:Optimized Defaults Figure 7: PC Health Status Reset Case Open Status Case Opened If the case is closed, "Case Opened" w ill show "No". If the case hav e been opened, "Case Opened" w ill show "Yes". If y ou w ant to reset "C ase Opened" v alue, set "Res et Case Open Status" to "Enabled" and sav e CMOS, y our computer w ill restart. Current Voltage (V) VCORE / VCC18 / +3. 3V / +5V / +12V 8Detec t sy stem' s v oltage status automatic ally . GA-8SQ800 Ultra/GA-8SQ800 Motherboard - 42 - Current CPU Temperature 8Detec t CPU tem perature automatic ally . English Current CPU/System FAN Speed (RPM) Detec t CPU/Sy stem Fan speed status automatic ally . CPU Warning Temperature Disabled 60°/140°F 70°/158°F 80°/176°F 90°/194°F Don't monitor CPU's temperature. (Default v alue) Alarm w hen CPU current temperature ov er than 60°/140°F. Alarm w hen CPU current temperature ov er than 70°/158°F. Alarm w hen CPU current temperature ov er than 80°/176°F. Alarm w hen CPU current temperature ov er than 90°/194°F. CPU FAN Fail Warning Disabled Enabled Fan Warning function disable. (Default v alue) Enalbe FAN w arning alarm w hen FAN s tops. System FAN Fail Warning Disabled Enabled Fan Warning function disable. (Default v alue) Enalbe FAN w arning alarm w hen FAN s tops. - 43 - BIOS Setup English Frequency/Voltage Control CMOS Setup Utility -Copy right (C) 1984-2002 Aw ard Softw are Frequency /Voltage Control CPU Clock Ratio Linear Frequency Control x CPU Clock (MHz) x DRAM Clock (MHz) AGP/PCI Clock Control x AGP Clock (MHz) x PCI Clock (MHz) AGP Voltage Control DRAM Voltage Control CPU Voltage Control higf: Mov e F5:Prev ious Values [10X] [Disabled] 100 AUTO [AUTO] 66 33 [Normal] [Normal] [Normal] Enter:Select +/-/PU/PD:Value F10:Sav e F6:Fail-Safe Defaults ESC:Ex it F1:General Help F7:Optimized Defaults Item Help Menu Lev el u Figure 8: Frequency /Voltage Control CPU Clock Ratio This setup op tion will automati cally assign by C PU detection. For W illamette CPU: 8X~23X default: 14X For C -Steppin g P4: 8X, 10X~24X default: 15X For N orthwood CPU: 12X~24X default: 16X The option w ill display "Locked" and read only if the CPU ratio is not changeable. Linear Frequency Control 8Disabled 8Enabled Disable this function. You may also press <Esc> to abort the selection and not enter a password. To disable password, just press <Enter> when you are prompted to enter password. A message "PASSWORD DISABLED" will appear to confirm the password being disabled. Once the password is disabled, the system will boot and you can enter Setup freely. The BIOS Setup program allows you to specify two separate passwords: SUPERVISOR PASSWORD and a USER PASSWORD. When disabled, anyone may access all BIOS Setup program function. When enabled, the Supervisor password is required for entering the BIOS Setup program and having full configuration fields, the User password is required to access only basic items. If y ou select "System" at "Password Check" in A dvance BIOS Features Menu, you will be prompted for the password every time the system is rebooted or any time you try to enter Setup Menu. If you select "Setup" at "Password Check" in Advance BIOS Features Menu, you will be prompted only when you try to enter Setup. "**" For GA-8SQ800 Ultra only. - 49 BIOS Setup English Save & Exit Setup CMOS Setup Utility -Copy right (C) 1984-2002 Aw ard Softw are }Standard CMOS Features }Adv anced BIOS Features }Integrated Peripherals }Pow er Management Setup }PnP/PCI Configurations }PC Health Status Top Performance Load Fail-Safe Defaults Load Optimized Defaults Set Superv isor Passw ord Set User Passw ord Sav e & Ex it Setup Ex it Without Sav ing higf:Select Item F10:Sav e & Ex it Setup Sav e Data to CMOS Figure 13: Sav e & Ex it Setup Save to CMOS and EXIT (Y/N)?Y }Frequency /Voltage Control ESC:Quit F8: Dual BIOS**/Q-Flash Type "Y" will quit the Setup Utility and save the user setup value to RTC CMOS. Type "N" will return to Setup Utility. "**" For GA-8SQ800 Ultra only. GA-8SQ800 Ultra/GA-8SQ800 Motherboard - 50 - English Exit Without Saving CMOS Setup Utility -Copy right (C) 1984-2002 Aw ard Softw are }Standard CMOS Features }Adv anced BIOS Features }Integrated Peripherals }Pow er Management Setup }PnP/PCI Configurations }PC Health Status Top Performance Load Fail-Safe Defaults Load Optimized Defaults Set Superv isor Passw ord Set User Passw ord Sav e & Ex it Setup Ex it Without Sav ing higf:Select Item F10:Sav e & Ex it Setup Abandon all Data Figure 14: Ex it Without Sav ing Quit Without Saving ( Y/N)? [. . . ] n Silicon Image SATA RAID utility** RAID utility for Silicon Image Serial-ATA 3112. n Giga RAID Utility** RAID utility for ITE IT8212. Please do not install "Silicon Image SIL3112 SATA RAID Driver Utility" under WIN98 or WIN ME if there is no Serial ATA Deivce. For top performance and compatibility, it is recommend to use the SATA daughter Card which has Silcon Image Chipset. "**" For GA-8SQ800 Ultra only. - 87 Appendix English SOFTWARE INFORMATION This page list the contects of softwares and drivers in this CD title. HARDWARE INFORMATION This page lists all device you have for this motherboard. GA-8SQ800 Ultra/GA-8SQ800 Motherboard - 88 - CONTACT US Contact us via the information in this page all over the world. -- U. K G. B. T. Tel: 44-1908-362700 Fax: 44-1908-362709 E-mail:support@gbt-tech. co. uk Web Address: www. gbt-tech. co. uk -- The Netherlands Giga-Byte Technology B. V. [. . . ]