User manual ASUS PVI-486AP4

[. . . ] · Never insert anything metallic into the monitor openings. Doing so may create the danger of electric shock. · To avoid electric shock, never touch the inside of the monitor. Only a qualified technician should open the monitor's case. [. . . ] · Be sure to hold the plug, not the cable, when disconnecting the monitor from an electrical outlet. · Openings in the monitor cabinet are provided for ventilation. To prevent overheating, these openings should not be blocked or covered. Also, avoid using the monitor on a bed, sofa, rug, or other soft surface. Doing so may block the ventilation openings in the bottom of the cabinet. If you put the monitor in a bookcase or some other enclosed space, be sure to provide adequate ventilation. · Do not expose the monitor to rain or use it near water. If the monitor accidentally gets wet, unplug it and contact an authorized dealer immediately. You can clean the exterior of the monitor with a damp cloth when necessary, but be sure to unplug the monitor first. · If your monitor does not operate normally--in particular, if there are any unusual sounds or smells coming from it--unplug the monitor immediately and contact an authorized dealer or service center. Connecting Your Monitor to a Computer 1. LED lights amber: power saving mode. 3. 4. · · · · LED is off: power off mode. Button : / Activate Brightness adjustment menu. 5. Increase the level of the function selected or move to the next function as the OSD menu is activated. Menu Button : Activate the OSD (On-Screen Display) main menu. Enter/select the icon(function) highlighted as the OSD menu is activated. Troubleshooting No Power - The monitor's power indicator is off. · Make sure the monitor power cord is fully inserted in the monitor's power socket and the electrical outlet. · Test the electrical outlet by plugging in a working electrical device such as a lamp. · Try another power cord on the monitor. You can use the computer's power cord to perform this test. No Video - The monitor's power LED indicator is on but there is no image on the screen. · Ensure that the signal cable is properly connected the monitor and the computer. [. . . ] · Ensure that the signal cable is properly connected the monitor and the computer. · Ensure that the computer is on and functioning properly. · Turn off the monitor and check the signal cable pins. · Press the SPLENDIDTM Button for 2 seconds to automatically adjust the image. [. . . ]