User manual ASUS R700T QUICK START GUIDE

[. . . ] Enter code number using the multifunction buttons. The first square is extinguished after entry of the first digit. The second square is extinguished after entry of the second digit, etc. The unit switches on automatically after entry of the 4th digit, if this and all other digits have been correctly entered. [. . . ] 6HWWLQJ The station providing TP announcements can be directly selected by pressing one of the multifunction buttons. For direct programming, set automatic tracking beforehand. 6'5 73, for example, indicates the currently activated TP transmitter. Press 35* 6'5, for example, to display the programmed TP transmitter. 'HOHWLQJ Press multifunction button "'(/" to delete the programmed TP transmitter and to set the unit to automatic tracking. Quitting the TP menu. 68 5DGLR 2SHUDWLRQ 6ZLWFKLQJ RII 73 Press and hold the button for longer than 2 seconds. Press multifunction button "73" repeatedly in the TP menu until 2)) and 6(/(&7 73 appears. TP is switched off after returning to normal display. 0XWH IXQFWLRQ VZLWFK RQRII After selection of a TP or EON transmitter, the mute function can be activated by pressing the button briefly. Thereafter, only traffic announcements are switched through. The mute function is cancelled by pressing the button again or by turning the volume control. If no TP transmitter is selected, 087( is displayed on actuating the button . In order to activate the backward music search, turn the right rotary control to the left until the desired number of tracks to be skipped has been set. The beginning of a track can only be found if there is a pause of at least 4 seconds between tracks. In order to cancel the function, press or turn the right rotary control, or press the track switching buttons or the fast forward / rewind buttons. 'ROE\ 15 To play cassettes recorded with Dolby NR, press the multifunction buttons % or & repeatedly for the desired noise reduction mode (Dolby B or Dolby C). A star is displayed alongside the Dolby noise reduction that has been set. To quit the noise reduction function, press multifunction button % or & repeatedly until the star is no longer displayed. 72 7DSH 2SHUDWLRQ 6NLS EODQN If skip blank is active, automatic forward is activated at blank tape sections which are longer than 10 to 15 seconds. In order to activate the function, press the multifunction button "6%" repeatedly until 21 or 2)) is shown on the display. 6FDQ VHDUFK Press the right rotary control to start the scan search. In order to cancel the function, press the track switching buttons or the fast forward / rewind buttons. &OHDQLQJ WKH FDVVHWWH PHFKDQLVP After a time, the reproduction quality of cassettes is reduced due to unavoidable dirt and dust deposits on the sound head. The drive components in the cassette mechanism also become dirty. For this reason the cassette mechanism should be cleaned from time to time. The prompt &/($1 appears on the display after each 30 hours running time. Use a cleaning cassette suitable for reverse operation for this purpose. [. . . ] Subsequently, push the slides into the apertures in the front of the unit to the first detent position (illustration A). Now lock the radio by pulling both slides, as shown in illustration B. Subsequently, remove the slides. $ % 90 5HPRYDO , QVWDOODWLRQ *XLGH For removal, the unit must first be unlocked. For this purpose, push in both slides to the second detent position, as shown in illustration A. [. . . ]