User manual ASUS REALTEK VERSION 1.00

[. . . ] 3D Audio Demo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 6. Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 7. Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 7. 1. How to Set Up Multi-Streaming Playback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Tool Show the following volume controls This is to let you freely decide which volume control items to be displayed. Advanced control is a "Microphone Boost" icon. Once this item is checked, you will find "advanced" icon beside "Front Pink In" & "Mic Volume". With this, the input signal into "Front Pink In" & "Mic Volume" will be strengthen. 5 Enable recording multi-streaming At any given period, you can have maximum 2 streams operating simultaneously. Figure 2-5 Recording tool @ Mixer 5 Once "Microphone Boost" enabled, all sound, including what you would like to record or background noise will be strengthen. To achieve better recording quality, you may try to enable "Microphone boost" along with improvement functionss provided at "Microphone" page. Audio I/O Realtek HD Audio Manager frees you from default speaker settings. Different from before, for each jack, they are not limited to perform certain functions. Instead, now each jack is able to be chosen to perform either output (i. e. Recording) function, we call this "Retasking". Audio I/O aims to help you set jacks right. Moreover, other than blue to blue, pink to pink, the way that you used to do, Audio I/O would guide you to other right jacks that can also serve as microphone / speaker / headphone. Figure 3-2 Connected device 6 Retasking function varies from each motherboard. You may find not every jack is re-taskable. Please read your system manual to learn which jacks support retasking function. 11 3 Audio I/O 3. 1. Speaker Configuration Step 1: Plug in the device in any available jack. Step 2: Dialogue "connected device" will pop up for your selection. Please select the device you are trying to plug in. (As Figure 3-2) If the device is being plugged into the correct jack, you will be able to find the icon beside the jack changed to the one that is same as your device. If not correct, Realtek HD Audio Manager will guide you to plug the device into the correct jack. (As Figure 3-3) Figure 3-2 Connected device Figure 3-3 Speaker configuration setting when wrong device plugged in7 7 In the case that your system supports retasking function for all ports, the warning dialogue "The device type is not supported" will not be shown. Check on your system guide to learn which ports support retasking function. [. . . ] Before set up, please make sure the playback devices are well plugged in the jacks. Enable playback multi-streaming (Mixer multi-streaming") Tool Check "Enable playback ii. Check the item "Update Playback Device Automatically" (Mixer "Update Playback Device Automatically") iii. At Mixer page, choose " Realtek HD Audio Rear Output" Tool Check iv. [. . . ]