User manual ASUS SOFTWARE REF

[. . . ] Graphics Card Software Reference E1496 Revised Edition V3 December 2003 Copyright © 2003 ASUSTeK COMPUTER INC. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing. ASUS PROVIDES THIS MANUAL "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. [. . . ] To restore the recommended values, click the Default button. Click Apply to apply settings or click OK to save settings and exit. Click Cancel if you want to exit and discard changes. Click Help to launch the ASUS VideoSecurity on-line help. 19 2. 3. 5 Advanced To configure the Hyper-Text Transfer Protocol (HTTP) server parameters: 1. Click the Advanced tab from the ASUS VideoSecurity setup page. 2. Click the Enable HTTP Server check box to enable or disable the use of the HTTP Server. When enabled, key-in your Internet Protocol (IP) address, Port and Connection timeout (in seconds. ) 3. Click the Enabled server authentication check box to enable or disable the server authentication feature. When enabled, key-in your account name and password. Click Apply to apply settings or click OK to save settings and exit. Click Cancel if you want to exit and discard changes. Click Help to launch the ASUS VideoSecurity online help. 20 3. ASUS GameFace ASUS GameFace is a real-time audio/video communication feature that enables point-to-point video conferencing functions and online gaming to take place at the same time. Make sure to enable the On-Screen Display (OSD) feature before using ASUS GameFace. See section "3. 4 GameFace settings" for details. 3. 1 Launching ASUS GameFace To launch ASUS GameFace: Click the Start button. Select All Programs->ASUS->ASUS GameFace->ASUS GameFace. ASUS GameFace automatically detects the connected audio/video WDM capture device upon start-up. 21 3. 2 Setting Local playback mode To start Local playback mode: From the GameFace menu, click Call then select Local Play/Stop or click the Play/Stop button on the GameFace dialog box. Play/Stop button 3. 3 Setting Network playback mode This section describes how you can connect , accept or terminate calls from a remote computer. 3. 3. 1 Connecting to a remote computer To connect to a remote computer: 1. Key-in the computer name (Local Area Network) or IP Address in the combo box. Select Call from the menu then click New Call or click the Make a Call button. GameFace prompts a message if the remote computer accepts the call. Make a Call button End Call button 22 3. 3. 2 Accepting a call To accept an incoming call: 1. The application prompts a message box on an incoming call. Click Yes to accept the call. 3. 3. 3 Terminating a call To terminate a call: From the GameFace menu, click Call then End Call or click the End Call button on the GameFace dialog box. 3. 4 Tools 3. 4. 1 Options To launch the GameFace options dialog box, click Tool then Option, or click the Options button. Transparency This item adjusts the opacity of the GameFace On-Screen Display menu. The GameFace OSD menu can be totally opaque or totally transparent with many intermediate gradations. Move the slider to adjust the transparency. Click OK to apply settings or Cancel to abort. 23 Position To set the GameFace on-screen position: 1. [. . . ] Click Apply to apply settings or click OK to save settings and exit. Click Cancel if you want to exit and discard changes. Click Help to launch the online help. 46 Adjustments To adjust the screen position and screen size : 1. From the Monitor Properties dialog box, click the Adjustments tab. [. . . ]