User manual ASUS TS100-E6PI4

[. . . ] Specifications and information contained in this manual ae furnished for informational use only, and are subject to change at any time without notice, and should not be construed as a commitment by ASUS. ASUS assumes no responsibility or liability for any errors or inaccuracies that may appear in this manual, including the products and software described in it. Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing. Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners' benefit, without intent to infringe. ii Contents Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Configuration options: [Disabled] [Enabled] Vanderpool Technology [Enabled] The Vanderpool Technology allows a hardware platform to run multiple operating systems separately and simultaneously, enabling one system to virtually function as several systems. Configuration options: [Disabled] [Enabled] CPU TM function: [Enabled] This function enables the overheated CPU to throttle the clock speed to cool down. Configuration options: [Disabled] [Enabled] Execute Disable Bit [Disabled] When disabled, forces the XD feature flag to always return to 0. Configuration options: [Disabled] [Enabled] Intel (R) SpeedStep (tm) tech. [Enabled] When set to [Disabled], the CPU runs at its default speed. When set to [Enabled], the CPU speed is controlled by the operating system. Configuration options: [Enabled] [Disabled] ASUS TS100-E6PI4 4-19 4. 4. 6 ChipsetConfiguration The Chipset Configuration menu allows you to change the advanced chipset settings. Select an item then press <Enter> to display the sub-menu. Advanced Advanced Chipset Settings WARNING: Setting wrong values in below sections may cause system to malfunction. NorthBridgeConfiguration SouthBridgeConfiguration BIOS SETUP UTILITY ConfigureNorthBridge features. NorthBridgeConfiguration Advanced BIOS SETUP UTILITY ENABLE: Allow remapping of overlapped PCI memory above the total physical memory. DISABLE: Do no allow remapping of memory. NorthBridgechipsetConfiguration MemoryRemapFeature [Enabled] PCIMMIOAllocation:4GBTo3584MB DRAMFrequency [Auto] ConfigureDRAMTimingbySPD [Enabled] InitiateGraphicAdapter PEGPortConfiguration PEGPort [PEG/PCI] [Auto] Memory Remap Feature [Enabled] Allows you to enable or disable the remapping of the overlapped PCI memory above the total physical memory. YES: Lets the operating system configurePlugandPlay (PnP) devices not required for boot if your system has a Plug and Play operating system. IRQ-3assignedto [PCIDevice] IRQ-4assignedto [PCIDevice] IRQ-5assignedto [PCIDevice] IRQ-7assignedto [PCIDevice] IRQ-9assignedto [PCIDevice] IRQ-10assignedto [PCIDevice] IRQ-11assignedto [PCIDevice] IRQ-14assignedto [PCIDevice] IRQ-15assignedto [PCIDevice] v02. 58(C)Copyright1985-2007, AmericanMegatrends, Inc. Plug And Play O/S [No] When set to [No], BIOS configures all the devices in the system. When set to [Yes] and if you install a Plug and Play operating system, the operating system configures the Plug and Play devices not required for boot. Configuration options: [No] [Yes] PCI Latency Timer [64] Allows you to select the value in units of PCI clocks for the PCI device latency timer register. Configuration options: [32] [64] [96] [128] [160] [192] [224] [248] Allocate IRQ to PCI VGA [Yes] When set to [Yes], BIOS assigns an IRQ to PCI VGA card if the card requests for an IRQ. When set to [No], BIOS does not assign an IRQ to the PCI VGA card even if requested. Configuration options: [Yes] [No] Palette Snooping [Disabled] When set to [Enabled], the pallete snooping feature informs the PCI devices that an ISA graphics device is installed in the system so that the latter can function correctly. Configuration options: [Disabled] [Enabled] IRQ-xx assigned to [PCI Device] When set to [PCI Device], the specific IRQ is free for use of PCI/PnP devices. When set to [Reserved], the IRQ is reserved for legacy ISA devices. Configuration options: [PCI Device] [Reserved] ASUS TS100-E6PI4 4-23 4. 5 PowerConfiguration The Power Configuration menu items allow you to change the settings for the ACPI and Advanced Power Management (APM) features. Select an item then press <Enter> to display the configuration options. Main Advanced BIOS SETUP UTILITY PowerBootExit [Disabled] [Enabled] Add additional tables as per ACPI 2. 0specifications. ACPI2. 0Support ACPIAPICSupport APMConfiguration Hardware Monitor Select Screen Select Item +- Change Option F1 General Help F10 aveandExit S ESC xit E v02. 58(C)Copyright1985-2007, AmericanMegatrends, Inc. ACPI 2. 0 Support [Disabled] Allows you to enable or disable the Advanced Configuration and Power Interface (ACPI) 2. 0 Support. Configuration options: [Disabled] [Enabled] ACPI APIC Support [Enabled] Allows you to enable or disable the Advanced Configuration and Power Interface (ACPI) support in the Advanced Programmable Interrupt Controller (APIC). [. . . ] Install an Intel® Pentium® 4 CPU that supports the Intel® EM64T. Install a 64-bit operating system (Windows® XP Professional x64 Edition). Install the 64-bit drivers for the motherboard components and devices from the support CD. Install the 64-bit drivers for expansion cards or add-on devices, if any. Refer to the expansion card or add-on device(s) documentation, or visit the related website, to verify if the card/device supports a 64-bit system. A. 2 Enhanced Intel SpeedStep® Technology (EIST) · The motherboard comes with a BIOS file that supports EIST. [. . . ]