User manual ASUS UL20A

[. . . ] Fujitsu, the Fujitsu logo, and LifeBook are registered trademarks of Fujitsu Limited. MS, MS-DOS, and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. The ExpressCard word mark and logo are owned by the Personal Computer Memory Card International Association (PCMCIA) and any use of such marks by Fujitsu Computer Systems Corporation is under license. PCMCIA is a trademark of the Personal Computer Memory Card International Association. [. . . ] Authentication Type - Open, Shared, WPA, WPA-PSK Procedure 1. Activate the WLAN device using either the Wireless On/Off Switch or the Intel PROSet for Wireless utility. Click the [Start] button first and then [All Programs]. Click the icon [Intel PROSet Wireless] to execute the Intel PROSet for Wireless utility. 2. 3. 52 N3510. book Page 53 Monday, April 25, 2005 9:05 AM W I r e l e s s L A N U s e r 's G u i d e 22. After selecting authentication type, enter the name, domain, and password of the user you have created on the authentication server. The user name and password do not have to be the same as name and password of your current Windows user login. From the Intel ProSet Wireless page, click the new profile name shown in the Profile List. Use the up and down arrows to position the priority of the new profile in the priority list. Click the Connect button to connect to the network. Click [Close] if you want to close the Intel(R) PROSet for Wireless window. 7. Set the IP address as follows: For ad hoc connection: Select [Use the following IP address:] and then enter data for [IP address] and [Subnet mask]. Click [Internet Protocol (TCP/IP] and then click [Properties]. The [Internet Protocol (TCP/IP) Properties] window will be displayed. 3. 6. Enter the desired name in less than 15 ASCII character code format. Identifiability can be enhanced by entering the model number, the user name, and other factors. 53 N3510. book Page 54 Monday, April 25, 2005 9:05 AM LifeBook N Series Notebook - Section Five b. [Workgroup name] is the group name of the network. Enter the desired name in less than 15 ASCII character code format. For ad hoc connection: Assign the same network name to all personal computers existing on the network. For access point (infrastructure) connection: Assign the name of the work group to be accessed. If a message is displayed that requests you to restart the personal computer, click [Yes] to restart the computer. 8. 9. Click [Service], then click the [Add] button. The [Select Network Service] window will be displayed. [. . . ] The USB 2. 0 specification is a peripheral bus standard for connecting external devices at up to 480 Mbps. Some features of the standard include support for up to 127 concurrent USB devices, dynamic insertion and removal of devices, and self-identifying peripheral configuration for true plug-and-play functionality. USB 1. 0 connects external devices at up to 11 Mbps. USB 2. 0 is backward-compatible with USB 1. 0 devices to allow you to connect older devices to the ports. [. . . ]