Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual ASUS VE225T. We hope that this ASUS VE225T user guide will be useful to you.
Lastmanuals help download the user guide ASUS VE225T.
Detailed instructions for use are in the User's Guide.
[. . . ] 12.
Selecting the voltage
The system's power supply unit has a 115 V/230 V voltage selector switch located beside the power connector. Use this switch to select the appropriate system input voltage according to the voltage supply in your area. [. . . ] If the voltage supply in your area is 100-127 V, set the switch to 115 V. If the voltage supply in your area is 200-240 V, set the switch to 230 V.
Quick Installation Guide
3
Removing the cover
1. Remove the cover screws.
3.
Pull the cover.
4.
Lift the cover, then set aside.
5.
Lift the expansion card lock to a 90º-100º angle.
6.
Lift the chassis support bracket, then remove.
Removing the front panel assembly
1. Pull the hooks outward to remove.
4
Quick Installation Guide
Installing a CPU
1. Unlock the socket.
3.
Insert the CPU to the socket.
4.
Push down the socket lever to secure the CPU.
Installing the CPU fan and heatsink assembly
1. Drive a screw on the top right screw hole on both sides of the drive. Connect the IDE and audio cable at the back of the drive.
3. 4.
Push the drive all the way into the bay until the drive lock clicks. Connect a 4-pin power plug from the power supply unit to the power connector at the back of the drive.
Installing a SATA hard disk drive
1. Drive two screws with rubber washers on both sides of the drive. [. . . ] Drive two screws with rubber washers on both sides of the drive. Connect the SATA signal and power plug at the back of the drive.
Power cable and plug Signal cable and plug Rubber washer
Quick Installation Guide
7
3.
Place the HDD on the tray.
4.
When the HDD screws align, push the drive on the bay.
HDD screw lock
Replacing the covers
1. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE ASUS VE225T
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual ASUS VE225T will begin.
