User manual ASUS VS239H

[. . . ] 3-16 INSTALLING THE SOFTWARE Natural Color . 4-3 TROUBLESHOOTING Monitor Self-Diagnosis . 5-3 MORE INFORMATION Specifications . 6-25 Correct Disposal of This Product (Waste Electrical & Electronic Equipment) - Europe only . [. . . ] For more information, refer to the document about the Windows operating system. Using the product 3-14 3-15 Product Operating Buttons Product Operating Buttons · · · Press one of the buttons on the monitor. If you press a button on the front of the monitor, an OSD guide will display showing the function of the button before the menu for the pressed button appears. To go to the menu, press the button on the front of the monitor again. ICON MENU DESCRIPTION Press this button to view the On Screen Display (OSD). This button is also used to exit the OSD or to return to a higher-level OSD menu * OSD Adjustment Lock This function locks the OSD in order to maintain the current settings or to prevent the settings from being changed by another person On: If you press and hold the MENU button down for 5 seconds, the OSD Adjustment Lock function is activated. Off: If you press and hold the MENU button down for 5 seconds again, the OSD Adjustment Lock function is disabled. Even if the OSD Adjustment Lock function is activated, users can adjust the brightness and contrast and can set up the adjustment function assigned to the [ ]. Users can set the <Customized Key> to one of the following functions. If the user presses the Customized Key [ ] after setting it, the configured function will be performed · < Angle> - < Bright> - <Eco Saving> - <Image Size> You can set the function of the Customized Key by selecting <SETUP&RESET > -> <Customized Key> in the OSD. / Use these buttons to navigate the menu or to adjust a value in the OSD. Use this button to control the brightness of the screen. 3-15 Using the product ICON Use this button to select a function. <Movie> Select this mode when the surroundings are dark. This will save power and reduce eye fatigue. <Custom> Select this mode when you want to adjust the image according to your preferences. This menu is unavailable when < Angle> or <Eco Saving> is set. Using the product 3-16 Menu Description This feature allows you to see optimal screen quality according to your viewing position. When viewing the screen at an angle from below, above or the side of the monitor, by setting the appropriate mode for each position you can obtain a similar picture quality as viewing the screen directly from the front. Set to <Off> when viewing directly in front of the screen. · · · · · · <Off> - Select when viewing from the front position. - Select when viewing from a slightly lower position. - Select when viewing from the lower position. -Select when viewing from the upper position. <Lean Back Mode1> <Lean Back Mode2> <Standing Mode> <Side Mode> - Select when viewing from the left or right position. , , position at the same <Group View> - Select when two or more persons view among time. Angle · <Custom> -When <Custom> is selected, settings for <Lean Back Mode 1> is applied by default. [. . . ] STATE Power Indicator Power Consumption NORMAL OPERATION On 27 W POWER SAVING MODE Blinking Typical 0. 3 W POWER OFF Off Typical 0. 3 W If there is no power cut-off switch, the power consumption is "0" only when the power cord is disconnected. More Information 6-20 6-21 Specifications MODEL NAME Size Panel Display area Pixel Pitch Synchronization Display Color Resolution Optimum resolution Maximum resolution Horizontal Vertical 27. 0 inches (68 cm) 597. 89 mm (H) x 336. 31 mm (V) 0. 3114 mm (H) x 0. 3114 mm (V) 30 ~ 81 kHz 56 ~ 75 Hz 16. 7 M 1920x1080 @ 60 Hz 1920x1080 @ 60 Hz RGB Analog, DVI(Digital Visual Interface) Compliant Digital RGB Input Signal, Terminated 0. 7 Vp-p ± 5% separate H/V sync, Composite, SOG TTL level (V high 2. 0V, V low 0. 8V) Maximum Pixel Clock Power Supply 164MHz (Analog, Digital) This product supports 100-240 V. Since the standard voltage may differ from country to country, please check the label on the back of the product. 15pin-to-15pin D-sub cable, Detachable DVI-D to DVI-D connector, Detachable 654. 0 x 405. 6 x 60. 3 mm (25. 7 x 16. 0 x 2. 4 inches) (Without Stand) Dimensions (WxHxD) / Weight 654. 0 x 483. 0 x 249. 2 mm (25. 7 x 19. 0 x 9. 8 inches) (With Stand) / 4. 8 kg (10. 58 lbs) Operating Temperature : 50°F ~ 104°F (10°C ~ 40°C) Humidity :10 % ~ 80 %, non-condensing Storage Temperature : -4°F ~ 113°F (-20°C ~ 45°C) Humidity : 5 % ~ 95 %, non-condensing 0° ~21°( ±2°) S27A350B Signal Cable Environmental considerations Tilt Operating Storage Design and specifications are subject to change without prior notice. Class B (Information Communication equipment for residential use) This device is registered for EMC requirements for home use (Class B). (Class B equipment emits less electromagnetic waves than Class A equipment. ) 6-21 More Information 6-22 Power Saving Function This monitor has a built-in power management system called PowerSaver. [. . . ]