User manual ASUS VW223B

[. . . ] The Samsung logo and SyncMaster are registered trademarks of Samsung Electronics Co. , Ltd. ; Microsoft, Windows and Windows NT are registered trademarks of Microsoft Corporation; VESA, DPMS and DDC are registered trademarks of Video Electronics Standard Association; the ENERGY STAR name and logo are registered trademarks of the U. S. As an ENERGY STAR Partner, Samsung Electronics Co. , Ltd. has determined that this product meets the ENERGY STAR guidelines for energy efficiency. All other product names mentioned herein may be the trademarks or registered trademarks of their respective owners. 12NF(E)TOC. fm Page 1 Tuesday, October 17, 2000 5:13 PM Contents Safety Instructions . [. . . ] Push the button or button until the "Geometry" screen is displayed. button or button to select : Access Function Geometry Push the button to open the Recall adjustment screen. button to adjust the YES NO : Previous Menu English 14 12NF(E)body. fm Page 15 Thursday, October 19, 2000 5:44 PM Adjusting Your Monitor Color RGB Color Color1 Color2 Color3 Recall Color temperature is a measure of the "warmth" of the image colors. The available range is between 5000 to 9300. Follow these steps to change the color temperature and adjust individual R, G, B color control. : Access Function Color1 1 0 0 0 With the menu off, push the button. Push the button or button until the "Color" screen is displayed. Use the button or button to select Color 1, Color 2, or Color 3. Push the button to open the "Color 1", "Color 2", or "Color 3" adjustment screen. The current color temperature is shown highlighted between 9300 and 5000. Use the button or button to adjust the color temperature. Adjust the color temperature as close to the desired temperature as possible using only the and buttons. button or button to select : Access Function Screen Push the button to open the Recall adjustment screen. button to adjust the YES NO : Previous Menu English 18 12NF(E)body. fm Page 19 Thursday, October 19, 2000 5:44 PM Adjusting Your Monitor Degauss RGB Advanced +++ Use the recall feature to reset Advenced settings to their original level. G Degauss Reset Sync. Input Type Video Input Level D-SUB/BNC USB 1 2 3 With the menu off, push the button. Push the button or button until the "Advanced" screen is displayed. button to select : Access Function Degauss Degaussing. . . Push the button to execute the degauss function. The degaussing screen will appear. : Previous Menu NOTE: The monitor may buzz momentarily, the image colors may change and the image will jiggle for a few seconds. These effects are normal. 4 Reset RGB After a few seconds, the degauss main menu will return. Advanced +++ G Degauss Reset Sync. Input Type Video Input Level D-SUB/BNC USB Use the recall feature to reset these monitor settings to their original levels: Position, Size, Pincushion, Trapezoid, Parallelogram, Pinbalance, Rotation, and Clear Moiré. 1 2 3 4 : Access Function Reset With the menu off, push the button. Push the button or button until the "Advanced" screen is displayed. button or button to select YES NO Push the button to open the recall selection screen. If you don't want to reset the monitor, use the button to select NO. : Previous Menu NOTE: If you have selected "YES", all settings listed above will be reset. [. . . ] Compliance with these directives implies conformity to the following European Norms: I EN55022:1998 ­ Radio Frequency Interference I EN55024:1998 ­ Electromagnetic Immunity I EN61000-3-2:1995 + A1 + A2 ­ Power Line Harmonics I EN61000-3-3:1995 ­ Voltage Fluctuations I EN60950 ­ Product Safety. Warning User must use shielded signal interface cables to maintain FCC compliance for the product. Declaration of conformity for products Marked with FCC Logo This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this Portuguese Italiano Español Deutsch device must accept any interference received, including interference that may cause undesired operation. The party responsible for product compliance: ASUS ELECTRONICS CO. , LTD America QA Lab of Samsung 85 West Tasman Drive San Jose, CA 95134 USA Tel) 408-544-5124 Fax) 408-544-5191 Provided with this monitor is a detachable power supply cord with IEC320 style terminations. It may be suitable for connection to any UL Listed personal computer with similar configuration. [. . . ]