User manual ASUS X53L EXPRESS GATE QUICK START GUIDE

[. . . ] Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners' benefit, without intent to infringe. · Intel, LANDesk, and Pentium are registered trademarks of Intel Corporation. · IBM and OS/2 are registered trademarks of International Business Machines. · Symbios is a registered trademark of Symbios Logic Corporation. [. . . ] BIOS SOFTWARE Onboard Audio Plug and Play Resource Data (CMI8330) Device Number Device name First I/O Resource Length Default Value Second I/O Resource Length Default Value IRQ Resource Default Value First DMA Resource Default Value Second DMA Resource Default Value 0 WSS&FM 530h, E80h, F40h 8h 530h 388h-3F8h 8h 388h 5, 7, 9, 10, 11, 12 11 0, 1, 3 0 ----1 MIDI 300h-330h 2h 330h ------5, 7, 9, 10, 11, 12 9 --------2 GAME 200h-FE0h 8h 200h ------------------3 SB16 220h, 240h 10h 220h ------5, 7, 9, 10, 11, 12 5 0, 1, 3 1 5, 7 5 Load BIOS Defaults The "Load BIOS Defaults" option allows you to load the troubleshooting default values permanently stored in the BIOS ROM. These default settings are non-optimal and disable all high performance features. To load these default settings, highlight "Load BIOS Defaults" on the main screen and then press <Enter>. The system displays a confirmation message on the screen. Press <Y> and then <Enter> to confirm. Press <N> and then <Enter> to abort. This feature does not affect the fields on the Standard CMOS Setup screen. Load Setup Defaults The "Load Setup Defaults" option allows you to load the default values to the system configuration fields. These default values are the optimized configuration settings for the system. To load these default values, highlight "Load Setup Defaults" on the main screen and then press <Enter>. The system displays a confirmation message on the screen. Press <Y> and then <Enter> to confirm. If you want to use another controller that supports four drives, you must disable the onboard IDE controller in the Chipset Features Setup screen. When auto-detection is completed, the program automatically enters all entries you accepted on the field for that drive in the Standard CMOS Setup screen. Skipped entries are ignored and are not entered in the screen. If you are auto-detecting a hard disk that supports the LBA mode, three lines will appear in the parameter box. Choose the line that lists LBA for an LBA drive. The auto-detection feature can only detect one set of parameters for a particular IDE hard drive. Some IDE drives can use more than one set. This is not a problem if the drive is new and empty. IV. BIOS Hard Disk Detect 56 ASUS P2L-VM/X53L User's Manual IV. BIOS SOFTWARE IMPORTANT: If your hard disk was already formatted on an older previous system, incorrect parameters may be detected. You will need to enter the correct parameters manually or use low-level format if you do not need the data stored on the hard disk. [. . . ] Audio Software Release Notes This information is provided for convenience only. Information here is subject to change without prior notice. View the installation CD for any updated information in Readme text files. The AudioRack also provides detailed online help (click the Help button on the "Command Center") Disable Eject Button on the CD Player Under the Windows directory in the file "auddrive. ini", there is a string "DisableEjectButton=0" under the [cdplayer] section. [. . . ]