User manual ASUS Z62E

[. . . ] IN NO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT. SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT. Products and corporate names appearing in this manual are used only for identification or explanation and to the owner's benefit, without intent to infringe. [. . . ] Use any of the recommended methods in this section to install the ASUS enhanced driver after booting your computer. 2. 2. 1 Windows 98SE/ME Method 1: ASUS Quick Setup Program (when Autorun is enabled) 1. Insert the support CD into your CD-ROM drive. From the 2D/3D Graphics & Video Accelerator main menu, click Drivers. 3. Click the ASUS Enhanced Driver Install button from the Drivers menu to copy the necessary files to your computer. Follow the succeeding screen instructions. 5. 7. b From the Folders box, double-click the WIN9xME folder and select ASUSNV9X. INF in the File name box. From the Update Driver Warning box, click Yes to confirm the setting up of the ASUS enhanced display drivers. Follow the succeeding screen instructions. When Setup has finished installing all the necessary files to your computer, click Finish. When you are returned to the Standard Display Adapter (VGA) Properties dialog box, click Close. In the Display Properties box, click Close. When prompted to select the display driver to install in your system, select the one that is located in the D:\WIN2KXP\ASUS and click Next. Follow the succeeding onscreen instructions. When Setup has finished installing all the necessary files to your computer, it prompts you to restart your computer. Click OK. 11 2. 2. 4 Windows NT 4. 0 Before installing the display driver in Windows NT 4. 0, make sure that you have installed Windows NT 4. 0 Service Pack 3 or later to take full advantage of the AGP features of your card. 1. Boot your Windows NT system and log on as Administrator. Switch display properties to VGA mode (16 colors, 640 x 480 pixels), then restart your computer. After startup, right-click on the Windows NT desktop and click Properties. Assuming that your CD-ROM drive letter is D, type D:\NT40 or click Browse to select the path of the display driver for Windows NT then click OK. Select the appropriate ASUS VGA Card model then click OK. When prompted, confirm installation of display drivers to copy all the necessary files. When done, click Close to return to the Display Properties box then click Apply. [. . . ] Click Finish, when setup is complete. The Smart Doctor utility works only for graphics card models with a built-in hardware monitor IC. If the hardware monitor IC is not present, the ASUS Tweak utility will be automatically installed. 23 3. 2 Install VideoSecurity VideoSecurity is a powerful security utility that detects any change in a specified surveillance region. Using video capture devices, video snapshots are captured automatically when there is a deviation in the user-defined surveillance region. An optional warning message is also sent via email or phone to the user. [. . . ]