User manual AT&T 1460

[. . . ] 91-5393-30-00_ATT1440_R1 2003. 3. 27 10:24 AM Page II USER'S MANUAL Part 2 2. 4 GHz Cordless Telephone with Caller ID/Call Waiting 1440/1140 Please also read Part 1 -- Important Product Information © 2002 Advanced American Telephones. AT&T and the Globe Design are trademarks of AT&T Corp. , licensed to Advanced American Telephones. 91-5393-30-00_ATT1440_R1 2003. 3. 27 10:24 AM Page III Visit us at www. telephones. att. com © 2002 Advanced American Telephones. AT&T and the Globe Design are trademarks of AT&TCorp. , licensed to Advanced American Telephones. Issue 2AT&T 02/03 91-5393-30-00_ATT1440_R1 2003. 3. 27 10:24 AM Page IV CONTENTS Parts List . [. . . ] Choose (for No) for a normal ringing pattern. If you chose in Step 7, a will be displayed with the directory entry. ¥NOTE: When memory is full the screen displays , an error tone sounds, and you will not be able to store a new number until you delete a stored number. 18 91-5393-30-00_ATT1440_R1 2003. 3. 27 10:25 AM Page 19 Edit a Number/Name Stored in the Directory 1 Press (DIR). The screen displays 2 Press or to scroll alphabetically through entries stored in memory --OR-- Press the dial pad key for the first letter of the entry you want to edit. When the screen displays the number you want to edit, press . Then press or until flashes. 3 4 5 Press . The screen displays the name and number. The flashing cursor appears at the end of the name. Use , and the dial pad keys to edit the name. Use to backspace and make a correction. Press to move to edit the Distinctive Ring setting. Press to save the edited information. 19 91-5393-30-00_ATT1440_R1 2003. 3. 27 10:25 AM Page 20 Delete a Number/Name Stored in the Directory 1 Press (DIR). The screen displays 2 Press or to scroll alphabetically through entries stored in memor y --OR-- Press the dial pad key for the first letter of the entry you want to delete. When the screen displays the number you want to delete, press . Then press or until flashes. 3 4 5 6 Press . You'll hear a long beep confirming the deletion. 20 91-5393-30-00_ATT1440_R1 2003. 3. 27 10:25 AM Page 21 Dial a Number from the Directory 1 Press (DIR). The screen displays 2 Press or to scroll alphabetically through entries stored in memor y --OR-- Press the dial pad key for the first letter of the entry you want to dial. When the screen displays the number you want to dial, press . Then press or until flashes. 3 4 Press . The phone automatically dials the number. --OR-- When the screen displays the number you want to dial, press . To dial a memory number refer to page ¥NOTE: 16. 21 91-5393-30-00_ATT1440_R1 2003. 3. 27 10:25 AM Page 22 CALLER ID OPERATION About Call History If you subscribe to Caller ID service with your local phone service provider, this phone stores all incoming calls (up to 99 at the handset) with valid Caller ID information in the call log. Name, number, time and date information can all be stored, if they are sent with the call. Calls are automatically stored in the order they are received, with call "1" stored as the oldest call. [. . . ] Put the handset in the base to re-initialize. 30 91-5393-30-00_ATT1440_R1 2003. 3. 27 10:25 AM Page 31 TELEPHONE OPERATION PROBLEM If you hear a two-beep signal when you try to use the handset: SOLUTION · You might be out of range. · If moving closer to the base doesn't help, try following the directions above for reinitializing the handset and base. PROBLEM If the phone does not ring when you receive a call: SOLUTION · Make sure the handset ringer is on. · Make sure the telephone line cord is connected firmly to the base and the telephone jack. · Make sure the AC adapter is plugged firmly into an outlet not controlled by a wall switch. [. . . ]