User manual AT&T 1818

[. . . ] 1 1818 Digital Answering System Speakerphone Fold open this manual for information about this product's installation and operation. Please also read Part 1 ­ Important Product Information. USER'S MANUAL Part 2 AT&T and the globe symbol are registered trademarks of AT&T Corp. licensed to Advanced American Telephones. © 2001 Advanced American Telephones. Issue 1AT&T 05/01 INSTALLATION Before You Install Choose a location for the answering system near a modular telephone jack and a standard electrical outlet not controlled by a wall switch. [. . . ] Enter your Remote Access Code and delete some or all messages. Press * 0 to make sure system is on before hanging up. The system announces "The machine will now hang up, " and disconnects the call. Memory full End remote access call 5 T E L E P H O N E O P E R AT I O N Dial Mode This phone comes set to operate with touch tone service. If you have dial pulse (rotary) service, you will need to reset the dial mode. If you hear clicks (not tones) when you dial, you have dial pulse (rotary) service. To change to dial pulse mode: 1 Press and release G. To change back to touch tone mode: 1 Press and release G. 2 Press #, #, #, 8. Mute To mute a call, press and release m. To return to two-way conversation, press and release m. Mute is canceled if you switch from handset to speakerphone or from speakerphone to handset. Hold To put a call on hold, press and release H. The LINE STATUS light will blink when a call is on hold. To take a call off hold, press and release H -- OR -- Press K -- OR -- Lift the handset of this phone -- OR -- Lift the handset of another phone on the same line. Ringer Volume While not on a call, use VOLUME + or to adjust the ringer volume. Setting to lowest level turns the ringer off. You will hear a three-beep tone when the ringer is turned off or set to highest level. Flash Press and release F instead of pressing the switchhook to activate telephone company subscriber services such as Call Waiting or Three-Way Calling. Handset/ Speakerphone Volume Control While on a call or listening to messages, use VOLUME + or to adjust the listening level. Press the bottom arrow to decrease volume. Redial Press and release R to dial the last number you dialed. The last number you dialed (up to 24 digits) is stored in redial memory until you dial another number. Making/Answering Calls 1 2 3 Lift the handset or press K. To switch from handset to speakerphone, press K, then hang up. To switch from speakerphone to handset, lift the handset. Temporary Tone NOTE: If you have touch tone service, you do not need to use the Temporary Tone feature. 1 Dial the call, then press and release *. Any buttons pressed after this send touch tone signals. After you hang up, the phone automatically returns to dial pulse (rotary) dialing. 2 6 T E L E P H O N E M E M O RY This telephone can store up to 13 numbers (up to 24 digits each). You can keep a record of stored numbers on the directory card. Storing One-Touch Numbers 1 2 3 Press G. [. . . ] See "Dial Mode" in the TELEPHONE OPERATION section of this manual for instructions. Set the dial mode to pulse, then hang up and dial again. If you have tone dialing service, you may be able to use either tone or pulse dialing mode. If you set the dial mode to tone, numbers are dialed much more quickly. [. . . ]