User manual AT&T 2320

[. . . ] USER'S MANUAL Part 2 2. 4 GHz Cordless Telephone 2320 with Caller ID/Call Waiting Please also read Part 1 -- Important Product Information © 2002 Advanced American Telephones. AT&T and the Globe Design are trademarks of AT&T Corp. licensed to Advanced AmericanTelephones. Visit us at www. telephones. att. com © 2002 Advanced American Telephones. AT&T and the Globe Design are trademarks of AT&TCorp. [. . . ] Press when the desired handset is highlighted. When someone at the other handset answers the call, announce the caller. Then press or place the handset in the base to complete the transfer. -- OR -- To have a conference call, pess and hold . 23 Forward a Call If you have installed additional AT&T 2300 handsets (purchased separately) with your 2320 telephone, you can forward a call from one handset to another without announcing the caller. Your call is put on hold and the screen displays 2 3 Use or to scroll through the list of registered handsets. Press when the desired handset, or is highlighted. The call will ring at the selected handset(s), and will be displayed. If a forwarded call is not answered within 30 seconds, the call will automatically be returned to the forwarding handset. The screen displays or the CID information (if available). If the returned call is not answered within 20 seconds, the call is automatically disconnected. 24 Conference Calling 1 If one handset is already on a call, you can connect a second handset to the call by pressing on the second handset -- OR -- You can first intercom another handset by pressing . , then when the desired handset is highlighted. After the other handset answers the intercom call, press and hold . 2 Disconnect either or both handsets by pressing . 25 PHONEBOOK This telephone can store up to 50 telephone numbers and names. Phone book entries are stored in alphabetical order. Storing a number and name in one handset automatically stores it in ALL registered handsets. (See "About Adding Handsets"on page 2 for details about additional handsets. ) Store a Number and Name in Phone Book 1 Press . The screen displays 4 Press to select . The screen displays 6 Enter the telephone number (up to 24 digits). 26 7 Press . The screen displays 8 Enter a name connected with this number, using the chart below. You must store a name with each number. Dial Key 1 A D G J M P T W 0 2 1 B E H K N Q U X 3 C F I L O R V Y Presses 4 5 2 3 4 5 6 S 8 Z a d g j m 7 t 9 6 b e h k n p u w 7 c f i l o q v x 8 9 r s y z * # ?, / - ( . ) & . To erase a digit or character press either (DELETE) or Pressing will move the cursor one space to the right. 27 9 Press . The screen returns to -- OR -- If the phone book is already full, the screen displays 10 Begin at Step 4 to enter another telephone number and name -- OR -- Press to exit. 28 Dial a Number in Phone Book 1 Press . The screen displays the first phone book entr y. The screen displays the first phone book entry and looks similar to 5 Enter the first letter of the stored name you want to find, then scroll using or -- OR -- Press or to scroll through phone book entries. [. . . ] · If the screen displays , place the handset in the base and charge for at least eight hours. · If the battery does not charge after eight hours, replace it with AT&T Battery 3301, SKU# 91076. PROBLEM If you have no dial tone: SOLUTION Check all the previous suggestions. If you still do not hear a dial tone, disconnect the phone and try another phone in the same jack. If there is no dial tone on that phone either, the problem is probably in your wiring or local service. PROBLEM If you hear a two-beep signal when you try to use the handset: SOLUTION The handset and base are not communicating properly. [. . . ]