User manual AT&T 265

[. . . ] USER'S MANUAL TRIMLINE® Caller ID Telephone 265 For Customer Service or Product Information, Visit Our Website at www. telephones. att. com © 2006 Advanced American Telephones. AT&T and the Globe Design are trademarks of AT&T Corp. , licensed to Advanced American Telephones. TABLE OF CONTENTS IMPORTANT PRODUCT INFORMATION························ 1 Safety Information························· 1 SAVE THESE INSTRUCTIONS··· 2 FCC and ACTA Information ············ 2 Interference Information: Part 15 of FCC Rules ·················· 3 Limited Warranty ························· 4 PARTS CHECKLIST ·················· 7 BEFORE YOU BEGIN ··············· 8 About Caller Identification (Caller ID)······························· 8 About Home Area Code and Local Area Codes ···················· 8 INSTALLATION······················· 9 Battery Installation ························ 9 Telephone Installation ··················· 10 Wall-Mount Installation ················· 10 Desktop Installation······················ 11 Handset Installation ······················ 12 TELEPHONE OPERATION·······13 Handset Operation ······················ 13 Handset Volume ······················· 13 MUTE···································· 13 Making and Answering Calls ········· 13 Pause/Redial ···························· 13 Low Battery ···························· 14 Line Status Indicator··················· 14 Call Indicator ··························· 14 New Call Light ························· 14 CLEAR ·································· 14 FLASH ··································· 14 Telephone Base··························· 15 RINGER Volume ······················ 15 FEATURES SETTING···············16 Feature Settings Summary ·············· 16 Language Selection ······················· 17 Set Contrast ······························ 18 Set Home Area Code (HAC)···········19 Set Local Area Codes (LACs) ··········20 Set Time/Date ····························21 Call Waiting ·······························22 Set Tone/Pulse ····························23 TELEPHONE MEMORY ··········· 24 Storing Numbers in Memory ···········24 Storing a CID Call Record into Memory ·································24 Storing a Pause in a Memory Number·································24 Two-Touch Dialing from Memory ·····25 One-Touch Dialing from Memory ·····25 Directory Card ···························26 CALLER ID OPERATION········· 27 Removing Call Records From Call Log ·································27 Removing a Specific Call Record·····27 Removing All Entries from Call Record ··························27 About Caller Identification··············28 Setting Options ···························29 Call Log ··································29 Review Call Log ························29 Display Dial ·····························29 Display Screen Messages ················30 IN CASE OF DIFFICULTY ······· 31 IIM P O R T A N T P R O D U C T IIN F O R M A T IIO N MPORTANT PRODUCT NFORMAT ON Safety Information This symbol is to alert you to important operating or servicing instructions that may appear in this user's manual. Always follow basic safety precautions when using this product to reduce the risk of injury, fire, or electric shock. Read and understand all instructions in the user's manual. [. . . ] Plug the other end of the handset cord into the handset and put the handset on the telephone base with the screen facing up. Lift the handset and listen for a dial tone. If there is no dial tone, see In Case of Difficulty at the back of this manual. Set the RINGER switch on the side of the telephone base to OFF, LO, or HI according to your preference. If it is set to OFF, this telephone will not ring when there is an incoming call, although the NEW CALL light will flash. NOTES: · The telephone works immediately after installation with the default feature settings (see Feature Settings Summary on page 16). You can make and answer calls as soon as the telephone is connected to a modular telephone wall jack. Batteries must be installed in order to activate the caller ID features and memory (see Battery Installation on page 9). · If you subscribe to caller ID services from your local telephone service provider, follow the instructions in Set Home Area Code on page 19 for the telephone to properly recognize and dial calls. It may be necessary to follow the instructions in Set Local Area Codes on page 20. 12 TELEPHONE OPERATION Handset Operation Handset Volume Adjust listening volume on the handset (LO, MED, or HI) Making and Answering Calls To make or answer a call, lift the handset. Ending Calls Return the handset to the telephone base. MUTE Press and hold MUTE to mute the microphone to prevent the other party from hearing you but you will still be able to hear the other party. Release MUTE to return to the original two-way conversation. PAUSE/REDIAL To insert a dialing pause when storing numbers in the memory or dialing, press PAUSE/REDIAL once to insert a 3. 6 second pause in the dialing sequence. Press PAUSE/REDIAL and the last number dialed (up to 32 digits) from this telephone appears on the screen while it is redialing. 13 TELEPHONE OPERATION Handset Operation New Call Light Flashes when there is an incoming call or there are unreviewed call entries in the call log. CLEAR Press to exit dialing, to exit storing a number in memory, to exit the call log, or to return to the idle screen anytime without saving the changes. FLASH When there is a call waiting signal, press FLASH to put the current call on hold and connect to the new call. Press FLASH again to return to the original call. Also, press FLASH to activate other telephone company subscriber services such as 3-way calling. Low Battery The batteries in the telephone base need to be replaced. Line Status Indicator This line status icon will light when this phone or another phone on the same line is in use. Call Indicator Indicates the total number of calls received and the number of unreviewed records in the call history. 14 TELEPHONE OPERATION Telephone Base RINGER Volume Adjust the volume of the telephone ringer. If it is set to OFF, this telephone will not ring when there is an incoming call. 15 FEATURE SETTINGS Feature Settings Summary NOTE: The features are listed in the order they appear when the telephone is initially set up. The order changes after the initial setup, but the procedures for setting each feature remain the same. Default settings are marked with an asterisk (*). Screen display Choice SET LANGUAGE Choose the desired language for the screen display. [. . . ] No dial tone · Ensure all plugs are connected properly and securely. · Inspect the telephone line cord connections at the modular jack and on the telephone. · Inspect the handset cord connections at both ends. · Unplug the telephone and connect it to another modular jack. [. . . ]