User manual AT&T 435

[. . . ] Plug one end of the line cord (supplied) into the unit's TEL LINE jack. Plug the other end of this cord into the modular wall jack, making sure it snaps firmly into place. (If you are connecting an answering machine, make sure it is connected between the unit and the telephone. ) Connect the power cord. Plug one end of the power cord into the back of the unit. [. . . ] -- OR -- If you dial 11 digits for all calls, whether or not they are in your area code, and whether or not they are long distance, enter 000 for your Home Area Code, and enter no Local Area Codes. 1 2 3 4 Press + until the screen displays the first digit of your area code, then press D. Press + until the screen displays the second digit of your area code, then press D. Press + until the screen displays the third digit of your area code, then press D. Press N. 5 Installation Settings Set Local Area Codes NOTE: If you call phone numbers in other area codes but do not dial "1" before the area code, and you dial only seven digits for numbers in your area code, 1) enter your area code as the Home Area Code, and 2) enter area codes before which you do not dial "1" as Local Area Codes. 1 2 3 4 5 Press and release N until you reach the Area Code screen. Press + until the screen displays the first digit of the area code, then press D. Press + until the screen displays the second digit of the area code, then press D. Press + until the screen displays the third digit of the area code, then press D. Press N to save. In addition to making a Language Selection, and setting Home and Local Area Codes, you can customize other operations of the Caller ID now or later (see "Choosing Display Options"). Buttons and Screen Indicators Indicates unreviewed call information Time call was received Indicates AM or PM Date call was received Position of call in call history Caller's telephone number Caller's name Scroll through Call List and select options Message Waiting & NEW CALL Light Customize features Dial number displayed on screen Remove a call from call history Access Call Waiting 6 About Caller Identification This product is designed to store and display information about incoming telephone calls. It must be used with Caller Identification service provided by your local telephone company; there is a fee for this service, and it may not be available in all areas. This product can provide information only if both you and the caller are in areas offering Caller Identification service, and if both telephone companies use compatible equipment. When you use this product with Caller ID service, you can see who's calling before you answer the phone. And if you subscribe to Call Waiting with Caller Identification, you can see who's trying to reach you even when you're on another call. Your telephone company must provide Caller ID with Call Waiting (Type II service) for this feature to work. (If you subscribe to these two features separately, you may not receive Caller ID with Call Waiting. Check with your local phone company. ) The unit keeps a record of the names and numbers of the last 50 calls, whether you answer the phone or not. When the first call is received, the unit sets the current time and date automatically (you cannot set them), and resets them each time a new call comes in. (The time and date line remain blank until the first call comes in. ) The unit automatically adjusts for daylight savings time. When not in use, the unit displays the current date/time, number of new calls received since the last review of memory, and number of reviewed calls in call history. For each call that comes in, the screen displays the following information between the first and second rings: · Your caller's name (15 letters are sent by your telephone company); · The caller's area code and telephone number (the area code is not displayed if it is programmed as the Home Area Code); · The time and date of the call; and · The position of the call in memory. If you answer a call before the information appears on the screen, it will not be in the call history. [. . . ] The unit will automatically dial "1" before the number when you use Display Dial. Display Dial Options Use this feature if you want to check and/or change the way a number in call history is dialed. 1 Press + or - to locate the number you want to call. 2 Press D to make the call -- OR -- Press N to see choices of how the number can be dialed (without "1" or the area code, with "1" but no area code, with an area code but no "1, " or with "1" followed by the area code). The displayed number is the currently selected method. [. . . ]