User manual AT&T 5800

[. . . ] 5800_CIB_1ATT 8/6/02 10:43 AM Page II USER'S MANUAL Part 2 Expansion Handset 5800 Please also read Part 1 -- Important Product Information © 2002 Advanced American Telephones. AT&T and the Globe Symbol are trademarks of AT&T Corp. , licensed to Advanced American Telephones. 5800_CIB_1ATT 8/6/02 10:43 AM Page III Visit us at www. telephones. att. com © 2002 Advanced American Telephones. AT&T and the Globe Design are trademarks of AT&T Corp. , licensed to Advanced American Telephones. [. . . ] Use only the battery supplied with this handset or AT&T Accessory Battery Model 2401, SKU#91077. · When you install the battery pack the first time, the handset will display ENTER BASE ID. 2 a) Remove battery compartment cover by pressing on indentation and sliding downward. b) Align the contacts and place the battery pack in the battery compartment. c) Replace cover by sliding it on its track up over battery case until it snaps firmly into place. Charge the handset battery. · Place the handset in the remote charging stand. · Charge the battery at least 12 hours. After the first charge, the battery typically charges in only eight hours. 2 5800_CIB_1ATT 8/6/02 10:43 AM Page 3 REGISTER THE HANDSET To Model 5830 Base Unit 1 2 3 4 5 Make sure to charge the handset battery pack at least 12 hours. Enter the 15-digit Base Unit ID Code located on the underside of your Model 5830 base. After about 45 seconds, the screen displays FOUND BASE. If the handset displays BASE BUSY TRY LATER, the base is in use. To Model 5840 Base Unit 1 2 3 4 Make sure to charge the handset battery pack at least 12 hours. At the 5840 corded base, press Use or MENU . to select DISPLAY BASE-ID. OK . The base screen will display the 15-digit Base ID Press code for about 30 seconds, then return to the idle screen. Write down the Base ID code so you can enter it at the handset in STEP 6 below. 5 6 7 8 At the cordless handset, use the softkey to select NEW. Use the softkey to select WAIT!!. OK . The screen displays PLEASE After about 45 seconds, the screen displays FOUND BASE. If the handset displays BASE BUSY TRY LATER, the base is in use. For complete operational instructions, please refer to the manual that came with your 5840 or 5830 telephone. 3 REGISTER THE HANDSET At the cordless handset, use the softkey to select NEW. 5800_CIB_1ATT 8/6/02 10:43 AM Page 4 INSTALLATION Belt Clip Attach the belt clip (optional). a) Slide down into grooves to attach. [. . . ] If you repeatedly get a low battery indicator, even after nine hours of charging, the battery should be replaced. Use only AT&T Battery 2401, SKU# 91077. CAUTION: Charge the battery provided with or identified for use with this product only in accordance with the instructions and limitations specified in the User's Manual, Part 1. · · 5 INSTALLATION ¥NOTE: Talk time and standby time may vary depending on operating conditions. Need Help Insert 8/6/02 8:25 AM Page 1 Congratulations on your purchase of this AT&T product. NEED HELP? Our representatives are here to help you with any questions concerning the operation of this product, available accessories, or any other related issues. Call Toll Free 1 (800) 360-4121 or visit our website at www. telephones. att. com [. . . ]