User manual AT&T 7700

[. . . ] OPERATING This cordless telephone operates at the maximum power allowed by the Federal Communications Commission (FCC). Even so, the handset and base can communicate over only a certain distance -- which can vary with the locations of the base and handset, the weather, and the construction of your home or office. If the handset is moved to a point where the base and handset can no longer communicate, the handset will sound two short beeps when you make a call, indicating that you are out of range. Move closer to the base to restore normal operation. [. . . ] For example, to store 555-1212 in memory location 9, press p, 5, 5, 5, 1, 2, 1, 2, p, 0, 9. Follow the directions below to mark a memory location as a VIP caller. 3 Press + or - to scroll through locations -- OR -- Enter the memory location number (01 - 20). (To remove VIP status, press m again. ) Deleting Memory Numbers and Names You can delete the information in a single memory location or in all memory locations. 3 Press + or - to scroll to the desired memory location. 5 Press L to delete the memory information. To delete all memory location information. 1 2 3 Press p. Press + or - to scroll to TOP OF LIST, then follow Steps 4 and 5 above. 5 Press p to store VIP status. 6 CALLER ID OPERATION Caller's name Caller's telephone number Voice mail message waiting (with paid service of telephone company voice mail) Battery status indicator New call information in call history since you last reviewed This telephone number has been stored as a VIP About Caller Identification This telephone is designed to store and display information about incoming telephone calls. It must be used with caller identification service provided by your local telephone company; there is a fee for this service, and it may not be available in all areas. Additionally, this telephone can be used with call waiting and voice mail, also paid subscriber services. This telephone can provide information only if both you and the caller are in areas offering caller identification service, and if both telephone companies use compatible equipment. The system keeps a record of the last 99 calls, whether you answer the phone or not. When the call history becomes full, the system drops the oldest call to make room for a new call. If you subscribe to Caller ID with Call Waiting, you can see who's trying to reach you when you're on another call. The time and date are sent by your service provider, and are recorded in the call history. In order to receive name and number Caller ID information, you must subscribe to name and number Caller ID service. Caller ID information appears in the display after the first ring of the incoming call. Select Display Screen Language 1 2 3 Press and release m. The screen displays the currently selected language. Use < or > to scroll through language selections: English, Spanish, or French. Press m when the screen displays your selection. Adjust Display Contrast 1 2 3 Press m, -. The screen displays the current contrast setting. Use < or > to scroll through settings: Contrast 1, 2, 3, or 4. The screen displays each selected setting. [. . . ] · Place the handset in the base, and check to make sure the CHARGING light is on. Unplug the AC adapter from the outlet, wait 15 seconds, then plug it in again. Wait another 15 seconds, then pick up the handset and press P. · Pick up the handset, open the battery compartment, and unplug the battery pack. [. . . ]