User manual AT&T 8243

[. . . ] USER'S MANUAL Part 2 900 MHz Cordless Telephone with Caller ID/Call Waiting 8243 Please also read Part 1 -- Important Product Information AT&T and the globe symbol are registered trademarks of AT&T Corp. licensed to Advanced American Telephones. © 2000 Advanced American Telephones. 850004193 Issue 1AT&T 7/00 CONTENTS BEFORE YOU BEGIN . . 3 About Caller Identification . . . . . . . . . . . . 3 TELEPHONE MEMORY . [. . . ] Press S to store your entry in the displayed location. 13 TELEPHONE MEMORY Edit Numbers Stored in Memory 1 2 3 4 Press < to review numbers stored in memory. Press S when the screen displays the number you want to edit. Press > to switch between name and number. Press S to save the edited information. Delete Numbers Stored in Memory Delete a Specific Number 1 2 3 4 5 6 Press < until the screen displays the number you want to delete. Press > until the DEL flashes on the screen. Press > until YES flashes on the screen. You'll hear a series of beeps confirming the deletion. Press G until the screen displays DEL PHN BOOK?Press S to choose the displayed option. Delete All Numbers Stored in Memory 1 Move Numbers Stored in Memory 1 2 3 4 Press < until the screen displays the number you want to move. Press S, then press > until MOVE flashes on the screen. The first available location is displayed. Press S to move the number to the displayed location -- OR -- Press <, enter a new location (01-50), then press S. 14 TELEPHONE MEMORY Dial Memory Numbers 1 2 1 2 3 Press P. Press M, then enter the memory location (01-50) -- OR -- Press < under the phonebook icon ( ) to review numbers stored in memory. Press < or > until the screen displays the number you want to call, or enter the first letter of the name stored with the number. Press P. 15 CALLER ID OPERATION Indicates number of times this party has called Caller's name Caller's telephone number Date of call Time of call Position of call in call history About Call History This phone assigns each incoming call a number from 1 to 50. The most recent call will have the highest number. When the memory is full, the oldest call information is deleted to make room for new incoming call information. For each call that comes in, the screen displays the following information between the first and second rings: · Your caller's name (15 letters are sent by your telephone company); · The caller's area code and telephone number; · The time and date of the call; and · The position of the call in call history. If you answer a call before the information appears on the screen, it will not be in the call history. Review Call History The screen displays call information for about 30 seconds after it has been received. 1 2 3 4 Press G until the screen displays CALL BLOCK?. Press < or > until ON is flashing on the screen. Press G until the screen displays BLK PREFIX_____ 5 6 7 1 2 3 Press S. [. . . ] Make sure the base antenna is fully upright. If the handset does not beep when you press P, the battery might need charging. Make sure the battery pack is installed correctly. If you have dial pulse (rotary) service on your phone line, make sure the dial mode is set to dial pulse (see INSTALLATION). If the above suggestions don't solve the problem, try re-initializing the handset and base: 1 2 3 4 5 6 Disconnect the power to the base. [. . . ]