User manual AT&T 906

[. . . ] User's Manual for the Speakerphone 906 Fold open this manual for information about this telephone's installation and operation. Please read Part 1 -- Important Product Information, included in this package. Part 2 © 1998 Philips Consumer Communications, L. P. 848236337 Issue 1AT&T I N S TA L L AT I O N NOTE: This telephone requires a modular telephone jack. Table If you have a wall-mounted telephone, remove the telphone from the wall and follow these instructions: 1 Remove the base. [. . . ] To release Hold, lift the handset from the cradle or press -- OR -- Lift the handset of an extension phone of the line on Hold -- OR -- If the handset is not in the cradle, press or lift the handset and press . Mute The Mute feature allows you to hear your caller, but your caller will not be able to hear anything you say. Press and release (the red MUTE light goes on) to talk privately with someone else in the room without the person on the phone hearing you. Press and release again (the MUTE light goes off) to continue your conversation with the other party. Flash The Flash feature is useful if you have subscribed to custom calling services from your local telephone company. Press instead of the switchhook to activate services such as call waiting or three-way calling. You may have to press other buttons before or after as explained in the custom calling instructions provided by your local telephone company. The button is used only as a substitute for pressing the switchhook. 3 Temporary Tone Dialing If you have rotary service, you can change from pulse to tone dialing during a call by pressing . This is useful if you need to send tone signals for access to telephone banking or long-distance services. 2 Press and release ; all keys pressed after this will send tone signals. 3 After you hang up, the phone automatically returns to rotary service. Digits pressed after will not be stored in Redial. Ringer Volume The RINGER volume switch allows you to turn the telephone ringer OFF, or to set it to ring at LO or HI volume. You can dial or answer calls normally with the ringer off. Other telephones in your home will still ring; they are not affected by the switch. M E M O RY Memory Features Numbers will remain stored in memory unless you erase or change them by entering other numbers. Capacity: This telephone can store 12 different telephone numbers, up to 24 digits long. One-Touch Dialing: Three numbers can be stored in one-touch memory locations. You can dial these numbers by pressing one of the buttons marked with an emergency symbol. Speed Dialing: Nine telephone numbers can be stored in standard speed-dialing locations. You can dial any of these numbers by pressing two buttons. Directory Card: Remove the directory card. Write your telephone number in the space provided. [. . . ] · Press and release the memory button (or press and a memory location 1-9) for the second location. Combine Manual and Memory Dialing Instead of using two memory locations, you might choose to store only part of a long number. You can use memory dialing to dial the stored portion, then dial the other digits manually. If the stored portion is dialed first, wait for dialing to stop before you continue with manual dialing. [. . . ]