User manual AT&T 974

[. . . ] 974CIB_06 4/7/06 3:32 PM Page II USER'S MANUAL Part 2 AT&T Small Business System Speakerphone with Intercom and Caller ID/Call Waiting 974 Please also read Part 1 -- Important product information © 2006 Advanced American Telephones. AT&T and the Globe Design are trademarks of AT&T Corp. , licensed to Advanced American Telephones. 974CIB_06 4/7/06 3:32 PM Page i Contents Before you begin. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Parts list. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Tools needed. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] NOTE: You can exit feature setup and return to the idle screen any time. Simply press and hold E. Feature setup n i 38 974CIB_06 4/7/06 3:32 PM Page 39 Assign the line group for this phone NOTE: You can exit feature setup and return to the idle screen any time. Simply press and hold E. 39 Feature setup kn o i 1. Press - until the screen display includes SPECIALHOPTIONS. Press - until the screen display includes LINE GROUP and the current setting. Press > or < to scroll through the line group choices (Line 04 . . . When the line group you want is shown, press - to save your choice. Proceed to step 5 on page 40 to reset all feature settings to default values. --OR-- Press and hold E to return to the idle screen. 974CIB_06 4/7/06 3:32 PM Page 40 Erase all settings and return the phone to default settings If you reset all features to the default settings, all previous feature programming and one touch entries will be erased. You will need to program your preferences for every feature again and re-enter numbers in one touch locations. Press - until the screen display includes SPECIALHOPTIONS. Press - until the screen display includes RESET ALL. The screen display includes ENTER:Resethall?. A tone sounds and the screen returns to showing RESETHALL. Press and hold E to return to the idle screen. Feature setup n i 1. 6. 7. NOTE: You can exit feature setup and return to the idle screen any time. Simply press and hold E. 40 974CIB_06 4/7/06 3:32 PM Page 41 You will need to program the next two features if this phone is the designated console phone for your Centrex system. NOTE: This feature is for use with Centrex systems only. Press - until the screen display includes CENTREX. The screen display includes CONSOLE and the current setting. Press < or > to toggle between On and Off. The screen display includes CSL DELAY RING. Proceed to step 5 of Set the Centrex console delayed ring time on page 42 to change the next feature (console delayed ring). [. . . ] · Identify the phone that will be the console phone. · Identify the private line for the console phone. The console phone must have its own private line. This line is not shared with any other phone. [. . . ]