User manual AT&T 993

[. . . ] User's manual 993 Two-line speakerphone with caller ID/call waiting Congratulations on purchasing your new AT&T product. Before using this AT&T product, please read the Important product information on pages 63-64 of this manual. Please thoroughly read the user's manual for all the feature operation and troubleshooting information necessary to install and operate your new AT&T product. You can also visit our website at www. telephones. att. com or call 1 (800) 222-3111. [. . . ] You may wish to write the names or telephone numbers of one-touch entries on the directory card, using the light gray spaces for the first nine locations and the dark gray spaces for the second nine locations. One-touch keys Nine one-touch locations (light gray) Nine one-touch locations (dark gray) LOWER key 38 One-touch operation (speed dial) One-touch (speed dial) Store a number in one-touch . Enter the phone number using the dial pad keys. -- OR -- Press (AUTO) REDIAL to copy the last number dialed from this telephone to this one-touch location. The screen will show the number as you enter it. The first 6 characters appear on the second line and the next eight on the third line. You can press to backspace and delete previous characters, or to move ahead and add one space. Each space counts as one digit and appears on screen as -. When finished entering the number, choose a one-touch location: Press the desired one-touch key. The screen displays the number entered and stored. -- OR -- Press LOWER, then press the desired one-touch key. The screen displays LOWER MEMORY, the number you entered, and Has been stored. NOTES: . You can exit the number storing process at any time: Press until the screen shows EXIT PROGRAM, then press ENTER. -- OR -- Press and hold ENTER. ONE TOUCH PROGRAM PROGRAM 234 - 567 WAIT LOWER MEMORY 234- 567 Has been stored 2. You can store up to 24 digits in each one-touch location. If you try to store more than 24 digits, the screen will briefly display Only 24 digits are allowed, and a low pitch (error) tone will sound. 39 One-touch operation (speed dial) One-touch (speed dial) Store a pause in a one-touch entry You can add a pause while storing a dialing sequence which requires a pause during actual dialing. Each pause counts as one digit and appears on the screen as P. Store a flash in a one-touch entry You can store the flash signal required for some special services as part of a dialing sequence. When entering a flash signal, press FLASH. Each flash counts as one digit and appears on screen as F. Store a wait in a one-touch entry You can include a 30-second wait while storing a dialing sequence which requires a break during actual dialing. While you are entering the number to be stored, the screen displays WAIT. [. . . ] Transportation, delivery or handing charges are prepaid. The manufacturer assumes no risk for damage or loss of the PRODUCT in transit. If the PRODUCT failure is not covered by this limited warranty, or proof of purchase does not meet the terms of this limited warranty, the manufacturer will notify you and will request that you authorize the cost of repair prior to any further repair activity. You must pay for the cost of repair and return shipping costs for the repair of products that are not covered by this limited warranty. [. . . ]