User manual AT&T E1126

[. . . ] User Manual 2. 4 GHz Cordless Telephone/Answering System E2126/E1126 with Caller ID & Call Waiting 14 Congratulations on your purchase of this AT&T product. Before using this telephone system, you must read Important Safety Instructions on pages 44 to 46 of this manual. NEED HELP? Our representatives are here to help you with any questions concerning the operation of this product, available accessories, or any other related issues. Call Toll Free 1 (800) 222-3111 In Canada, Call 1 (866) 288-4268 or visit our website at www. telephones. att. com Model No. : Product Name: Serial No. : Purchase Date: AT&T E2126/E1126 2. 4 GHz Cordless Telephone/Answering System SN: (found on the bottom of the telephone base) Place of Purchase: IMPORTANT Information about Caller ID with Call Waiting This product has a Caller ID with Call Waiting feature that works with service from your local phone service provider. Caller ID with Call Waiting lets you see who is calling before you answer the phone, even when you're on another call. You may need to change your phone service to use this feature. [. . . ] They are saved, played back and deleted exactly like incoming messages. You can record a memo as a reminder to yourself, or leave a message for someone else if others in your household use the answering system. To record a memo Elapsed recording time (in seconds). Press PLAY/ STOP to stop recording. 1. REC/MEMO "Record after the tone. Press STOP when you are done. " Press REC/MEMO. Elapsed time (in seconds) is shown in the message window as you record. You can record a memo up to 4 minutes long. Memos less than 1 second long will not be recorded. To play back a memo Press PLAY/STOP to hear messages and memos (see page 33 for other options). 2. Speak into microphone. 14 Microphone 3. (PLAY/STOP) Beep (Memo has been recorded). 33 Answering System Operation Message window displays 14 The message counter usually displays the total number of memos and incoming messages. See the list below for explanations of other displays in this counter. Message counter displays 0 1-98 No messages. Number of messages/memos, or message number currently playing (flashes if you have new messages). Current remote access code while setting (see page 31). Elapsed time while recording a memo (see page 33) or announcement up to 90 seconds (page 29). Messages must be deleted before new messages can be received. Announcement Only mode is on (see page 30). System is answering a call, or being accessed remotely. System is being programmed or initialized. Displayed for one second when any feature option setting is turned on or off. Current number of rings while setting (see page 31). Message window 10-99 1-8 1-99 (counting) 99 (flashing) F (flashing) CL (flashing) A --- (flashing) On (or) OF 02, 04, 06, tS 34 Answering System Operation your telephone number 1. from any When system answers, enter your two-digit remote access code (19 unless you have changed it). Remote access Use the remote access feature to check your messages while you are away by calling your home phone number from any touch tone phone outside of your home. When the answering system picks up, simply enter a two digit security code to then access your messages. This code is set at 19 by default; see page 31 to change it. Play all messages 2. remote commands 3. save all undeleted 1 2 Press to listen to all messages. [. . . ] AAT will return repaired or replaced Product under this limited warranty to you, transportation, delivery or handling charges prepaid. AAT assumes no risk for damage or loss of the Product in transit. If the Product failure is not covered by this limited warranty, or proof of purchase does not meet the terms of this limited warranty, AAT will notify you and will request that you authorize the cost of repair prior to any further repair activity. You must pay for the cost of repair and return shipping costs for the repair of Products that are not covered by this limited warranty. 50 Appendix Limited Warranty 6. [. . . ]