User manual AT&T E1812B

[. . . ] User's manual E5812B/E5813B/E5814B/ E1812B/E1813B/E1814B 5. 8 GHz cordless telephone/ answering system with caller ID/call waiting Congratulations on purchasing your new AT&T product. Before using this AT&T product, please read the Important safety instructions on pages 51-53 of this manual. Please thoroughly read the user's manual for all the feature operations and troubleshooting information necessary to install and operate your new AT&T product. You can also visit our website at www. telephones. att. com or call 1 (800) 222-3111. [. . . ] The entry copied to your telephone directory remains in the call summary until deleted. 3. MENU/SEL AM Edit name as desired 4. MENU/SEL AM Edit number as desired 5. MENU/SEL AM 6. MENU/SEL AM Entry added to phone directory 32 Answering system operation Message capacity The answering system can record up to 95 messages depending on the length of each message. Individual messages can be up to four minutes Message counter Number of messages (or during playback, message number currently playing) minutes. Messages will remain available for replay until you delete them. Voice prompts Each time you press any answering system key, the answering system uses voice prompts to guide you. Press repeatedly to hear setup options (page 36). Press to review or record announcement; press again to quit (page 35). Press to record a memo (page 38) or after pressing ANNC. to record an outgoing announcement (page 35). Press to turn answering system on or off (page 40). Press to adjust playback volume (page 37). Press to review or set clock (page 34). Press to delete message currently playing; press and hold to delete all old messages (page 37). Press to repeat message; press twice to play previous message (page 37). Press to start or stop message playback (page 37). Press to skip a message (page 37). 33 Answering system operation Day & time announcements To set day and time Before playing each message, the answering system announces the day and time when the message was received. 1. CLOCK. The system will announce the current clock setting, then announces "To set the clock, press CLOCK. " 2. CLOCK. Before using the answering system, follow the steps on the left of this page to set the day, time and year, so that messages are dated correctly. If the clock is not set, before new messages are recorded, the system will announce "Time and day not set" before each message is played back. The system uses voice prompts to guide you. Each time you press SKIP or REPEAT , the day, hour, minute or year increases or decreases by one. When you hear the correct setting, press CLOCK The system will announce the current day setting, then announces "To change the day, press SKIP or REPEAT , to change the hour, press CLOCK. " 3. SKIP or REPEAT until the system announces the correct day, then press CLOCK. To check day and time You can press CLOCK at any time to hear the current day and time without changing it. NOTES: 1. You can press and hold SKIP or REPEAT to increase or decrease the minutes or years by ten. 4. SKIP or REPEAT until the system announces the correct hour, then press CLOCK. After you set the time once, it will thereafter The time will be set automatically only if you subscribe to (page 27). until the system announces the correct minute, then press CLOCK. 6. SKIP or REPEAT until the system announces the correct year, then press CLOCK. The system announces the current clock setting. 34 Answering system operation Outgoing announcements Elapsed recording time (in seconds). The outgoing announcement is the message callers hear when calls are answered by the answering system. The telephone is factory set with an announcement. If the telephone is set up to record messages, it answers calls with "Hello. Please leave a message after the tone. " You can use this announcement, or replace it with a recording of your own voice. Press to stop recording. 1. ANNC. Press PLAY or press RECORD. " To play your outgoing announcement Press ANNC. , you will hear "Announcement. Press PLAY or press RECORD. " Then press PLAY/STOP. You will hear the outgoing announcement. [. . . ] If this product is equipped with a corded or cordless handset, it is hearing aid compatible. If this product has memory dialing locations, you may choose to store emergency telephone numbers (e. g. , police, fire, medical) in these locations. If you do store or test emergency numbers, please: 54 FCC Part 15 This equipment has been tested and found to comply with the requirements for a Class B digital device under Part 15 of the Federal Communications Commission (FCC) rules. These requirements are intended to provide reasonable protection against harmful interference in a residential installation. [. . . ]