User manual AT&T E2520

[. . . ] 91-000020-021-000-E2520 Manual-ENG. qxd 2/13/1950 7:21 PM Page 1 User Manual (Part 2) 2. 4 GHz Cordless Speakerphone E2520 with Caller ID & Call Waiting 91-000020-021-000-E2520 Manual-ENG. qxd 2/13/1950 7:21 PM Page 2 You must install and charge the batteries before using the telephone. STOP! See page 7 for easy instructions. For customer service or product information, visit our web site at Please also read Important Product Information Enclosed in product package. www. telephones. att. com or call 1-800-222-3111. Add new handsets to make your phone more versatile (see page 27) Your telephone can accommodate up to eight cordless handsets. You can add new handsets (Model E250, sold separately) at any time. Up to four handsets at a time can be used. The handset provided with your telephone is automatically registered as Handset 1. [. . . ] To turn it on or off, select MENU, press V until CLOCK MODE is highlighted, then press OK. Press ON or OFF buttons to enable or disable the clock display, then press OK. Select SET TIME. HANDSET SETTINGS SET TIME CLOCK MODE REGISTER ^ OK V Enter time, press AM/PM, then SAVE. SET TIME 12:00 AM < SAVE AM/PM To turn clock on or off. CLOCK ENABLE ON OFF OK ON 15 91-000020-021-000-E2520 Manual-ENG. qxd 2/13/1950 7:21 PM Page 16 Telephone Operation HANDSET 1 REDIAL MENU MEM Base settings from handset Base Settings Menu in Handset This menu allows the user to set Tone/Pulse and Ringer Melody on the base by handset. CALLS LOG HANDSET SETTINGS SET TIME CLOCK MODE Tone/Pulse You can choose Tone or Pulse dialing for the base and all registered handsets. Change this to PULSE only if you do not have touch-tone dialing service. At the handset: Follow the steps at the left to use handsets to select between Tone or Pulse. At the base: Press * button three times to enter programming mode. The IN USE and SPARE BATTERY lights will flash. Press 0 to select between Tone or Pulse. If you select Tone, the IN USE light will turn on. If you select Pulse, the IN USE light will turn off. Press # to confirm your selection. ^ OK V SET TIME CLOCK MODE REGISTER BASE SETTINGS ^ OK V TONE/PULSE RINGER MELODY ^ OK V TONE PULSE ^ OK V TONE PULSE ^ OK V 16 91-000020-021-000-E2520 Manual-ENG. qxd 2/13/1950 7:21 PM Page 17 Telephone Operation TONE/PULSE RINGER MELODY Base settings from handset V ^ OK Base ringer volume At this menu you can set a default ring volume level (16), or turn the ringer off. Press * button three times to enter programming mode at the base. The IN USE and SPARE BATTERY lights will flash. Press VOLUME buttons to hear an example of each volume level, then press # to select the one you prefer. Base ringer melody Base ringer melody can be set by the base or by any registered handsets. This feature allows you to choose one of eight incoming call melodies. RINGER # 01 < OK > RINGER # 02 < OK > At the handset: Follow the steps at the left to use handsets to choose one of eight incoming call melodies for the base. At the base: Press * button three times to enter programming mode. The IN USE and SPARE BATTERY lights will flash. Press key pad keys 1-8 to to hear an example of each ringer tone, then press # to select the one you prefer. RINGER # 08 < OK > 17 91-000020-021-000-E2520 Manual-ENG. qxd 2/13/1950 7:21 PM Page 18 Phonebook PAT JOHNSON 908-555-0100 Memory capacity V ^ EDIT The phonebook can store up to 50 entries. Each entry can contain a number up to 32 digits, and a name up to 16 letters long. A convenient search feature can help you find and dial numbers quickly (see page 20). Timeouts and error tones If you pause for too long while making an entry the procedure will time out and you will have to begin again. If all memory locations are in use, an error tone will sound when you attempt to enter a new number. [. . . ] They must be removed immediately and replaced with rechargeable NiMH batteries (see page7). Rechargeable batteries have been installed but may be old or need to be replaced. Remove and re-install the batteries and use normally until fully discharged then let them fully recharge in the handset or base. If the above measures do not correct the problem, your batteries should be replaced (see page 7). [. . . ]