User manual AT&T E5927

[. . . ] User's manual 5. 8 GHz Cordless Telephone/Answering System E5926/E5927B/ E5937B/E5947B/E1937B with Caller ID/Call Waiting Congratulations on your purchase of this AT&T product. Before using this telephone system, please read Important safety instructions on pages 51 to 53 of this manual. NEED HELP? Our representatives are here to help you with any questions concerning the operation of this product, available accessories, or any other related issues. Call toll free 1 (800) 222-3111 In Canada, call 1 (866) 288-4268 or visit our web site at www. telephones. att. com Model #: Product name: Serial #: (found on the bottom of the telephone base) Purchase date: Place of purchase: E5926/E5927B/E5937B/E5947B/E1937B 5. 8GHz cordless telephone/answering system IMPORTANT Information about caller ID with call waiting This product has a caller ID with call waiting feature that works with service from your local telephone service provider. Caller ID with call waiting lets you see who is calling before answering the phone, even when you're on another call. You may need to change your telephone service to use this feature. [. . . ] Press 3 twice to delete all old messages while in remote access idle mode (message not being played). Press during the caller's message to repeat the message. Press during the beginning of the day and time announcement to go back to the previous caller's message. Press to stop any operation (stop playback, stop recording). Press to skip current message and advance to next message. Press to review current outgoing announcement. Press * 7, wait for beep, then begin speaking. Press 5 to stop recording and hear playback of the new announcement. Press 8, wait for beep, then begin speaking. 4. Enter remote commands (see list at right). Hang up to end call and save all undeleted messages. Delete the message 3 33 4 Repeat or go back Stop 5 NOTE: If you pause for more than 10 seconds during remote access, you will hear a help menu listing all features & commands. If you issue no command for another 20 seconds, the call will end automatically. Skip to next message 6 Review announcement #7 Record announcement *7to begin recording 5to stop recording Record memo 8to begin recording 5to stop recording Review remote access code #9 *9 Press # 9 to review remote access code. Change remote access code Press * 9 to change remote access code, then enter desired remote access code from 10-99. 38 Answering system operation Remote access Help menu *5 0 0 Press to hear list of features & commands. Incoming calls will no longer be answered. If off, system will answer after 10 rings. Enter your access code, then press 0 to turn it on. Turn system off Turn system on 39 Appendix Screen icons, indicator lights & tones Screen icons & alert tones Screen icons Ringer off. Battery charging (animated display). HANDSET 1 MUTE NEW 11/23 Low battery (flashing); place handset in base or charger to recharge. MUTE NEW 10:01 AM Microphone is muted. Missed and un-reviewed calls. Handset alert tones Two short beeps Four short beeps Two beeps Press VOLUME keys while the volume levels are already at limits. Out of range during off-hook. Confirmation tone Programming command completed successfully. Base tones One beep every 10 seconds A series of beeps Message alert. Press VOLUME keys while the volume levels are already at limits. Indicator lights On when answering system is on and ready to receive calls. ANSWER ON/OFF IN USE CHARGE On when handset is in use or you are registering a handset. Flashes when another phone is in use on the same line, or answering system is answering an incoming call, or you are de-registering a handset from the base. On when speakerphone is in use. On when handset is in the cradle of the telephone base and charging. SPEAKER 40 Appendix Handset display screen messages Screen display messages PHONE ENDED CALL LOG EMPTY The handset is in use. You are accessing an empty call log. DIRECTORY EMPTY You are accessing an empty directory. [. . . ] AAT will return repaired or replaced product under this limited warranty to you, transportation, delivery or handling charges prepaid. AAT assumes no risk for damage or loss of the product in transit. If the product failure is not covered by this limited warranty, or proof of purchase does not meet the terms of this limited warranty, AAT will notify you and will request that you authorize the cost of repair prior to any further repair activity. You must pay for the cost of repair and return shipping costs for the repair of products that are not covered by this limited warranty. 57 Appendix Limited warranty 6. [. . . ]