User manual AT&T E5944B

[. . . ] User's Manual 5. 8 GHz Cordless Telephone/Answering System E5943B/ E5944B with Caller ID/Call Waiting Congratulations on your purchase of this AT&T product. Before using this telephone system, you must read Important safety instructions on pages 52 to 54 of this manual. NEEDHELP? Our representatives are here to help you with any questions concerning the operation of this product, available accessories, or any other related issues. Call toll free 1(800)222-3111 In Canada, call 1(866)288-4268 or visit our website at www. telephones. att. com Model #: Product name: Serial #: E5943B/E5944B 5. 8 GHz Cordless Telephone/Answering System (found on the bottom of the telephone base) Purchase date: Place of purchase: IMPORTANT Information about caller ID with call waiting This product has a caller ID with call waiting feature that works with service from your local telephone service provider. Caller ID with call waiting lets you see who is calling before you answer the phone, even when you're on another call. You may need to change your phone service to use this feature. [. . . ] This code is 19 by default; see page 34 to change it. Play all messages Press to hear all messages. 2. When system answers, enter two-digit remote access code remote commands 3. (see (19 unless you have changed it). 4. Hang up to end call and save all undeleted messages. 1 2 Play new messages Delete the message Press to hear new messages. Press during playback to delete current message. Press 3 twice to delete all old messages. Press during the caller's message to repeat the message. Press during the beginning of the day and time announcement to go back to the previous caller's message. Press to stop any operation (stop playback, stop recording). Press to skip current message and advance to next message. 3 33 4 Repeat or go back Stop 5 NOTE: If you pause for more than 10 seconds during remote access, you will hear a help menu listing all features & commands. If you issue no command for another 20 seconds, the call will end automatically. Skip to next message 6 Review announcement Press to review current outgoing #7 announcement. Record announcement Press * 7, wait for beep, then begin *7to begin recording 5to stop recording Record memo speaking. Press 5 to stop recording and hear playback of the new announcement. 8to begin recording 5to stop recording #9 *9 Press 8, wait for beep, then begin speaking. Press 5 to stop recording. Review remote access Press # 9 to review remote access code. code Change remote access Press * 9 to change remote access code, then enter desired remote code access code from 10-99. Answering system operation Remote access Help menu *5 Turn system off Press to hear list of features & commands. Incoming calls will no longer be answered. If off, system will answer after 10 rings. Enter your access code, then press 0 to turn it on. 0 0 Turn system on Appendix Screen icons, indicator lights & tones Screen icons & alert tones Screen icons Ringer off. Battery charging (animated display). HANDSET 1 MUTE NEW 11/23 Low battery (flashing); place handset in base or charger to recharge. MUTE NEW 10:01AM Microphone is muted. Missed and un-reviewed calls. Handset alert tones Two short beeps Four short beeps Two beeps Confirmation tone Press VOLUME keys while the volume levels are already at limits. Programming command completed successfully. Base tones One beep every 10 seconds A series of beeps Message alert. Press VOLUME keys while the volume levels are already at limits. Indicator lights ANSWER ON/OFF IN USE On when answering system is on and ready to receive calls. On when handset is in use or you are registering a handset. [. . . ] AAT will return repaired or replaced product under this limited warranty to you, transportation, delivery or handling charges prepaid. AAT assumes no risk for damage or loss of the product in transit. If the product failure is not covered by this limited warranty, or proof of purchase does not meet the terms of this limited warranty, AAT will notify you and will request that you authorize the cost of repair prior to any further repair activity. You must pay for the cost of repair and return shipping Appendix Limited warranty costs for the repair of products that are not covered by this limited warranty. [. . . ]