User manual AT&T TL92328

[. . . ] User's manual TL92278/TL92328/TL92378 DECT 6. 0 cordless telephone/answering system with BLUETOOTH® wireless technology Congratulations on your purchase of this AT&T product. Before using this AT&T product, please read the Important safety information on pages 86-88 of this manual. Please thoroughly read this user's manual for all the feature operations and troubleshooting information necessary to install and operate your new AT&T product. You can also visit our website at www. telephones. att. com or call 1 (800) 222-3111. [. . . ] To play your current outgoing announcement 1. Press PLAY/STOP to hear the outgoing announcement. To replay the announcement, press PLAY/STOP after playback is completed. at anytime to exit the announcement menu. To record a new outgoing announcement 1. Press RECORD and begin speaking after you hear, "Record after the tone. Speak facing the telephone base from approximately nine inches (20 cm) away. Your recorded announcement will be played back. To listen to the recorded announcement again, press PLAY/STOP after playback is completed. To record a new announcement, press RECORD and follow the above steps. at any time to exit the announcement menu. The elapsed time (in seconds) will be shown in the message counter when recording. You can record an announcement up to 90 seconds. An announcement shorter than two seconds will not be recorded. 56 Answering system Outgoing announcements To delete your outgoing announcement 1. Press DELETE during playback to delete your announcement. "Announcement deleted. " will be announced. When your announcement is deleted, calls will be answered with the pre-recorded announcement previously described on page 56. 57 Answering system Answering system setup You can change the number of rings, telephone base ringer volume, remote access code and message alert tone. NOTE: To adjust the voice prompt volume, press VOLUME . 1. When the phone is idle, press SETUP repeatedly to hear the feature settings. When you hear the feature you want to change, press SKIP or REPEAT to change the setting. · Number of rings - set the number of rings before the answering system answers an incoming call. · Base ringer - set the volume of the telephone base ringer. · Remote access code - change the code required to access your answering system from another telephone. [. . . ] It supersedes all other written or oral communications related to this PRODUCT. The manufacturer provides no other warranties for this PRODUCT. The warranty exclusively describes all of the manufacturer's responsibilities regarding the PRODUCT. No one is authorized to make modifications to this limited warranty and you should not rely on any such modification. [. . . ]