User manual ATI RADEON HD 5770

[. . . ] The contents of this document are provided in connection with Advanced Micro Devices, Inc. AMD makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to discontinue or make changes to products, specifications, product descriptions, and documentation at any time without notice. No license, whether express, implied, arising by estoppel or otherwise, to any intellectual property rights is granted by this publication. Except as set forth in AMD’s Standard Terms and Conditions of Sale, AMD assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. [. . . ] Do not push or pull on the flexible cable. Com manuals search engine 14 ATI CrossFireX™ Technology Figure 3–2 ATI CrossFireX Bridge Interconnect Protection Tag Figure 3–3 ATI CrossFireX Installation 1 2 ATI CrossFireX graphics cards Interconnect 9. Fasten the graphics cards securely to the back panel. Make sure the cables are not interfering with anything inside the computer (for example, a cooling fan) and then replace the computer cover. Reconnect any cables you have disconnected and plug in the computer power cord. Turn on the monitor and then the computer. ATI CrossFireX must now be enabled using ATI Catalyst Control Center. Enabling ATI CrossFireX When the ATI CrossFireX configuration is detected for the first time by the ATI Catalyst display driver, ATI CrossFireX support is usually enabled automatically, and the best possible GPU combination is selected based on the hardware configuration. If necessary, you can change the existing ATI CrossFireX configuration using the following procedure. aTI Radeon™ dual-GPU graphics cards are designed based on ATI CrossFireX technology. As a result, ATI CrossFireX support is always enabled for such cards. Based on the navigation system contained in the ATI Catalyst Control Center window, do one of the following: ➭ ➭ Navigation menu—On the Graphics menu, click CrossFireX™. Navigation tree—From the tree in the Graphics Settings tab, click CrossFireX™. From the Graphics Adapter list, select the graphics card to act as the display GPU. Note: The Choose from the following Rendered GPU combinations dropdown list automatically populates with all available render GPUs based on the selected display GPU. The list displays only GPUs that can be enabled for ATI CrossFireX. Other combinations are not listed here but may be listed on the CrossFire™ ▷ From the list, select the appropriate combination. Note: If the selected combination is not the most optimal choice for your system, a message appears at the bottom of the page notifying you of this. In some configurations, when ATI CrossFireX is enabled, GPU Accelerated Physics is automatically disabled for all cards in the configuration as are all displays except the one used by ATI CrossFireX. Com manuals search engine Chapter 4 Reference The following section offers troubleshooting tips and provides customer care, warranty, and compliance information. €¢ A 500 watt or better power supply with two 75 watt 6-pin PCIe power connectors. €¢ Certified power supplies are strongly recommended; for a list of certified power supplies, see ati. [. . . ] Online or mail 24 hours a day AMD Customer Care for Graphics Products will work to resolve your issue and help you to get your product up and running. If your issue is not resolved, our technicians will determine whether the difficulty you are experiencing is the © 2009 Advanced Micro Devices, Inc. Com manuals search engine 24 Reference result of the product, whether your product contains a defect, and whether your product is under warranty. • AMD Customer Care is unable to assist with refunds , returns , or exchangespecific inquiries. [. . . ]