User manual ATIKA BTK BROCHURE

[. . . ] Complaints made at a later date will not be acknowledged. EC Declaration of Conformity Extent of delivery Description of the device Operating times Symbols on the machine / in the operating manual Proper use Residual risks Safety instructions Commissioning Working with the garden shredder Changing the blades Maintenance and cleaning Guarantee Technical data Operational faults Spare parts Assembly 10 10 10 11 11 11 11 12 13 14 14 14 14 15 16 128 138 1 pre-assembled device unit base frame 2 wheels 2 wheel covers 2 feet 1 screw bag 1 retaining basket 1 push stick 1 operating manual KG Schinkelstraße 97 59227 Ahlen - Germany herewith declare under our sole responsibility that the product Garden Shredder type AMF 2500 Serial number: see last page is conform with the above mentioned EC directive as well as with the provisions of the guidelines below: 2004/108/EC, 2006/42/EC and 2000/14/EC. On / Off switch Safety cut-off screw Hopper opening for material to be shredded Housing lid Retaining basket Motor protection Handle Main plug Housing Lower enclosure part Retaining basket locking Base frame with wheels and feet Please observe as well the regional regulations for noise protection. Diameter (depending on wood species and freshness) - wilted, moist garden refuse that has already been stored for several days, alternating with branches Shredding of glass, metal, plastic parts, plastic bags, stones, fabric cut-offs, roots with soil, waste without solid consistency (e. [. . . ] Wear suitable work clothes: - do not wear loose-fitting clothes - slip-proof shoes Within his area of work the operator is responsible for third parties. The machine must not be operated by children or young people under 16 years of age. Physically, sensorially or mentally handicapped persons or persons who have no relevant experience and/or knowledge are not allowed to operate the device, unless a person responsible for their safety supervises them or instruct them on how to use the device. Children must be supervised to make sure that they do not play with the device. Never operate the machine if other persons are in the immediate vicinity. Choose a working position alongside the equipment. Never reach into the filling or ejection opening. Keep your face and body away from the filling opening. You work better and safer in the given performance range. Only operate the machine with complete and correctly attached safety equipment and do not alter anything on the machine that could impair the safety. Do not alter the revolution speed of the motor, since this controls the safe maximum operating speed, and protects the motor and all rotating parts against damage due to excess speed. Do not use the cable to pull the plug from the socket. Regularly check the extension cables and replace them if they are damaged. Do not use any defective connection cables. When working outdoors, only use extension cables especially approved and appropriately labelled for outdoor use. Do not set up any provisional electrical connections. never bypass protective devices or deactivate them. Only hook up the machine by means of a fault-current circuit breaker (30 mA). The electrical connection or repairs to electrical parts of the machine must be carried out by a certified electrician or one of our customer service points. Local regulations ­ especially regarding protective measures ­ must be observed. Repairs to other parts of the machine must be carried out by the manufacturer or one of his customer service points. Accidents can arise for the user through the use of other spare parts. [. . . ] Never place hands, other parts of the body or clothing into the filler funnel, ejection channel or in the vicinity of other moving parts. Check that no chopped residues are in the filling hopper before switching on the equipment. Do not tip or tilt the machine when the motor is running. When filling, be careful that no pieces of metal, stones, bottles or other objects unintended for processing, enter the filling hopper. [. . . ]