User manual ATIKA BV 2400 BROCHURE

[. . . ] Electrical devices do not go into the domestic rubbish. Do not operate machine before having read the operating instructions, understood all the notes and assembly the machine as described here. Not observing this instruction can lead to injuries or cause damage to property. important information on proper handling. [. . . ] - Keep handles dry and free of oils and grease. - Follow the maintenance instructions and the instructions for spool exchange. Check the machine for possible damage - Before continuing to use the machine, the protective devices must be inspected to ensure that they work perfectly and with their intended function - Check whether the parts are damaged. All parts must be correctly installed and fulfil all conditions to ensure perfect operation of the saw - Damaged guards and parts must be properly repaired or exchanged by a recognized, specialist workshop; insofar as nothing else is stated in the instructions for use. - Damaged or illegible safety warning labels should be replaced immediately. Store the unused machine in a dry locked place away from the reach of children. Accidents can arise for the user through the use of other spare parts. The manufacturer is not liable for any damage or injury resulting from such action. Before using the shredder, make sure each time that - there are no faulty connections (tears, cuts, etc. ) - there are no damage at the machine - all screws are tight - check the hydraulic system for any possible leaks Compare the voltage given on the machine model plate e. Only use connection cables with sufficient diameters. Do not use any defective connection cables. Connect the machine via a 30 mA fault current safety switch. Design of the connection cable according to IEC 60245 (H 07 RN-F) with a core cross-profile section of at least - 3 x 1. The motor will not be able to provide its maximum performance and the operation of the machine will be impaired. the coupling in the connection lead must be splashproof. When laying the connecting attachments, be sure that they do get crushed or bent, and that the plug-and-socket connection does not get wet. Do not use the cable for purposes for which it is not meant. Protect the cable against heat, oil and sharp edges. Do not use the cable to pull the plug from the socket. Regularly check the extension cables and replace them if they are damaged. Do not use any defective connection cables. [. . . ] See a doctor if your fingers swell, you don't feel well or your fingers become numb. This version has adjustable motor speed and therefore adjustable vacuuming and blowing. The speed is fully variable from 6000 rpm to 13000 rpm. Working with the garden vac What can I vacuum and blow? [. . . ]