User manual ATIKA KSG 220 A BROCHURE

[. . . ] Description of device / spare parts Extent of delivery EC Declaration of conformity Symbols machine /operating instructions Characteristic noise values Proper use Residual risks Safety instructions Preparing for commissioning Commissioning Working instructions Working with the chain sharpener Maintenance and care Storage Guarantee Technical data Possible faults 10 10 10 10 11 11 11 11 13 13 13 14 14 15 15 15 15 Electrical devices do not go into the domestic rubbish. KG Schinkelstraße 97, D-59227, Ahlen declare under our sole responsibility, that the product Chain sharpener KSG 220 A to which this declaration relates corresponds to the relevant basic safety and health requirements of the Directive 98/37/EC, and to the requirements for the other relevant Directives: 2004/108/EG, 73/23/EWG 20 Denomination Rotary table, complete Supporting table Mounting screw (with spring) Chain stop Guide plate Guide rail Locking nut Setting screw (for grinding depth) Grinding wheel (100 x 3. 2 x 10 mm) Cover Handle ON-OFF Switch Grinding head Screw M4 x 6 Nut M8, self-locking Flange Safety label 1 pair of carbon brushes (not shown) Grinding wheel (100 x 4. Carefully read operator's manual before handling the machine. [. . . ] - do not wear loose-fitting clothes or jewellery; they can catch in moving parts. - wear a hair-net if your hair is long Wear protective clothing: - safety goggles - ear protection (Sound intensity level at workplace can exceed 85 dB (A)) - dust mask Keep your workplace in an orderly condition!Take into consideration environmental influences: - Do not use the device in moist or wet ambience. - Do not expose the chain sharpener to rain. - Do only work with sufficient visibility conditions. Persons under the age of 18 must not operate the device. Do not allow other persons, especially children, to touch the tool or cable. You work better and safer in the given performance range. Only operate the machine with complete and correctly attached safety equipment and do not alter anything on the machine that could impair the safety. Do not use any grinding wheels which do not comply with the indicated characteristics of this instruction manual. The use of other tools and other accessories may present a risk of injury to you. Switch the machine off and remove the mains plug from the socket when - carrying out repair works - maintenance and cleaning - Elimination of failures (including freeing a blocked grinding wheel) - Storage - Leaving the chain sharpener (even in case of shortterm interruptions) Caution!Do not brake the grinding wheel by hand or using lateral pressure. Maintain your chain sharpener with care: - Keep the device free of oil and grease. - Follow the maintenance instructions and the instructions for tool exchange. Check the machine for possible damage: - Before continuing to use the machine, the protective devices must be inspected to ensure that they work perfectly and with their intended function. - Check whether the movable parts function perfectly and do not stick or whether the parts are damaged. all parts must be properly mounted and all conditions met to ensure the flawless operation of the chain sharpener. - Unless otherwise indicated in the operating instructions, damaged safety devices and parts must be properly 12 - Damaged or illegible safety warning labels should be replaced immediately. Do not allow any tool key to be plugged in!Before switching on, check always that wrenches and adjusting tools are removed. Store unused equipment in a dry, locked place out of the reach of children. [. . . ] hint: We recommend the additional placement of a rubber pad to reduce noise and vibration (not included in scope of delivery). The small parts required for mounting are not included in the scope of delivery. Use the following for this purpose: Position 1. Before commencing work, ensure the following: Workplace tidied? [. . . ]