User manual ATIKA SBH 2500 BROCHURE

[. . . ] Insert front suction pipe into rear suction pipe. Support front suction pipe on the ground and press rear suction pipe into front piece. Do not operate machine before having read the operating instructions, understood all the notes and assembly the machine as described here. Not observing this instruction can lead to injuries or cause damage to property. [. . . ] Store the unused machine in a dry locked place away from the reach of children. Switch the machine off and remove the mains plug from the socket when - carrying out repair works - carrying out servicing and repair works, removal of faults - checking the leads to see whether these are caught up or damaged - changing over from vacuuming to blowing - transporting - leaving unattended (even during short interruptions) - unusual noises and vibrations Check the machine for possible damage - Before continuing to use the machine, the protective devices must be inspected to ensure that they work perfectly and with their intended function - Check whether the parts are damaged. All parts must be correctly installed and fulfil all conditions to ensure perfect operation of the saw - Damaged guards and parts must be properly repaired or exchanged by a recognized, specialist workshop; insofar as nothing else is stated in the instructions for use. - Damaged or illegible safety warning labels should be replaced immediately. Design of the connection cable according to IEC 60245 (H 07 RN-F) with a core cross-profile section of at least - 3 x 1. The motor will not be able to provide its maximum performance and the operation of the machine will be impaired. the coupling in the connection lead must be splashproof. When laying the connecting attachments, be sure that they do get crushed or bent, and that the plug-and-socket connection does not get wet. Do not use the cable for purposes for which it is not meant. Protect the cable against heat, oil and sharp edges. Do not use the cable to pull the plug from the socket. Regularly check the extension cables and replace them if they are damaged. Do not use any defective connection cables. When working outdoors, only use extension cables especially approved and appropriately labelled for outdoor use. Do not set up any provisional electrical connections. never bypass protective devices or deactivate them. The electrical connection or repairs to electrical parts of the machine must be carried out by a certified electrician or one of our customer service points. Local regulations ­ especially regarding protective measures ­ must be observed. Repairs to other parts of the machine must be carried out by the manufacturer or one of his customer service points. Accidents can arise for the user through the use of other spare parts. The manufacturer is not liable for any damage or injury resulting from such action. The machine may only be operated by persons over the age of 16 years, and who have read and understood these operating instructions. [. . . ] The suction power decreases when the bag is full. Switch the machine off and disconnect from the mains. After finishing work, move the changeover switch to the blowing setting to remove any remains from the suction/blowing pipe. ­ It is advisable to take up fallen leaves when the weather is dry and as soon as they have fallen. [. . . ]