User manual ATIKA VT 32

[. . . ] Do not operate machine before having read the operating instructions, understood all the notes and assembly the machine as described here. Keep the instructions in a safe place for future use. Electrical devices do not go into the domestic rubbish. Declaration of conformity Extent of delivery Operating times Symbols machine Symbols used in the operating instructions Normal intended use Residual risks Security instructions Assembly Start-up Setting the work depth Working instructions Working with the thatcher Working with the lawn aerator Maintenance and care Transport Storage Guarantee Description of device / Spare parts Possible faults Technical data 16 16 16 16 16 16 16 16 19 19 20 20 20 21 21 21 22 22 22 23 24 Report any damage or missing items to your dealer, supplier or the manufacturer immediately. [. . . ] Maintain your thatcher / lawn aerator with care: - Ensure that all nuts, bolts and screws are tight. - Make sure that the ventilation apertures are free. Design of the connection cable according to IEC 60245 (H 07 RN-F) with a core cross-profile section of at least - 1. The motor does not reach any longer its maximal power; the function of the device is reduced. Plugs and coupler outlets on connection cables must be made of rubber, non-rigid PVC or other thermoplastic material of same mechanical stability or be covered with this material. the connector of the connection cable must be splashproof. When running the connection line observe that it does not interfere, is not squeezed, bended and the plug connection does not get wet. Wind off completely the cable when using a cable drum. Do not drive the device across the extension cable. Make sure that it is behind you in a secure position. Place the cable on a path or area that has already been thatched. K Do not use the cable for purposes for which it is not meant. Protect the cable against heat, oil and sharp edges. Do not use the cable to pull the plug from the socket. protect yourself against electric shocks. Avoid touching earthed parts with your body (e. Regularly check the extension cables and replace them if they are damaged. Do not use any defective connection cables. When working outdoors, only use extension cables especially approved and appropriately labelled for outdoor use. Do not set up any provisional electrical connections. never bypass protective devices or deactivate them. Only hook up the machine by means of a fault-current circuit breaker (30 mA). [. . . ] ) as these can damage the synthetic parts. Wear protective gloves when working with the blades. Therefore check the condition of the blades before each use. If necessary, have the blades sharpened by an expert or replaced by new ones. [. . . ]