User manual ATLAS AFS2352A

[. . . ] Surround Cooling System · Freshness depends on cooling speed. The surround cooling system blows cold air to every corner for powerful cooling. Door in Door (option) · You don't need to open the heavy door thanks to this feature. And it is free from frequent door openings and saves energy greatly. [. . . ] · If the appliance is not level, there may be unusual noises and poor cooling. · Wait for at least one hour before plugging the appliance in. · Wipe and clean the appliance inside and outside with a damp cloth. Plug the fridge/freezer into a wall socket used exclusively by this appliance. · This appliance must be properly earthed. · It is recommended that you wait for the appliance to cool for 2-3 hours before storing food in it. Warning Use of an earthed socket exclusively for the appliance: · If you are using a socket with an earthing terminal, you do not require a separate earthing connection. Use of a non-earthed socket: · Connect the "earthing wire" to the copper plate and bury it at a depth of at least 25 cm in the ground. LEVELLING If the front of the appliance is slightly higher than the rear, the door can be opened and closed more easily. The appliance tilts down to the left. Turn the left adjusting leg in the direction of the arrow until the appliance is level. The appliance tilts down to the right. Turn the right adjusting leg in the direction of the arrow until the appliance is level. 4 PREPARING THE FRIDGE/FREEZER To prepare your appliance for use and check that it is running correctly, take the following steps. Install all shelves and compartments removed during transport in the correct positions. Clean the fridge/freezer and accessories to remove any dust that accumulated during packing and shipping. · Use when The wish to freeze foods quickly. in which the you temperature of the room · The SUPER indicator remainsis placed fast freeze function is running. refrigerator/freezer on while the · While this function is selected, the refrigerating device remains switched on continuously and produces a very low temperature inside the freezer. · The fast freeze function switches off automatically. When the fast freeze process is completed, To store. . . the SUPER indicator switches off and the freezer switches back to the previous setting temperature. A large amount of food Colder FRE. TEMP Button An average amount of foodtemperature displayed is theCold temperature of the freezer. Between Colder and setting · In the normal mode, the · To change the freezer temperature: A ­ Press the FRE. TEMP button. Cold small amount of food The current setting temperature is displayed () preceded by "F" (). ­ Press the FRE. TEMP button one or more times or hold it down until the required temperature is displayed (). · The temperature changes in sequence. [. . . ] This sound occurs when the various accessories contract or expand. The front corners and sides of the appliance are warm and condensation starts to form · Heat-proof pipes are installed in the front corners of the appliance to prevent condensation from forming. When the surrounding temperature rises, this may not always be effective. · In very humid weather, condensation may form on the outer surface of the appliance when the moisture in the air comes into contact with the cool surface of the appliance. [. . . ]