User manual ATLAS AOK2-904

[. . . ] And please pass it to any future owner of the appliance. We wish you much joy with your new appliance. CONTENTS OPERATING INSTRUCTIONS SAFETY INFORMATION Children and vulnerable persons safety General safety Use Care and cleaning Installation Frost precautions Water connection Electrical connection Service centre Disposal of the appliance PRODUCT DESCRIPTION CONTROL PANEL Cancel button Programme selection buttons Extra silent programme button Multitab button Delay start button Display Function buttons Setting mode USE OF THE APPLIANCE SETTING THE WATER SOFTENER Manual adjustment Electronic adjustment USE OF DISHWASHER SALT USE OF DETERGENT AND RINSE AID Use of detergent Use of rinse aid Adjust the rinse aid dosage MULTITAB FUNCTION LOADING CUTLERY AND DISHES 3 3 3 3 3 4 4 4 4 5 5 5 6 7 8 8 8 8 8 8 8 9 9 9 10 10 11 11 11 12 12 12 13 Hints and tips 13 WASHING PROGRAMMES 13 SELECT AND START A WASHING PROGRAMME 14 Select and start a washing programme without delay start 14 Select and start a washing programme with delay start 15 Interruption of a washing programme 15 How to cancel a washing programme or a delay start 15 At the end of the washing programme 15 Auto Off 16 Remove the load 16 CARE AND CLEANING 16 To remove and clean the filters 16 To clean the spray arms 17 To clean the external surfaces 17 WHAT TO DO IF. . . 17 The washing results and drying results are not satisfactory 19 How to activate the rinse aid dispenser 20 TECHNICAL DATA 20 ENVIRONMENT CONCERNS 20 INSTALLATION INSTRUCTIONS INSTALLATION Installation under a counter How to remove the appliance worktop To adjust the level of the appliance Water drain connection 21 21 21 21 22 22 Subject to change without notice Safety information 3 OPERATING INSTRUCTIONS SAFETY INFORMATION Before the installation and use, read this manual carefully: · For your personal safety and the safety of your property. · For the respect of the environment, · For the correct operation of the appliance. [. . . ] If necessary, contact your local water authority. Water hardness °dH 51 - 70 43 - 50 °TH 91 - 125 76 - 90 mmol/l 9, 1 - 12, 5 7, 6 - 9, 0 Clarke 64 - 88 53 - 63 Water hardness adjustment manually 2 1) 2 1) electronically 10 9 10 Setting the water softener Water hardness °dH 37 - 42 29 - 36 23 - 28 19 - 22 15 - 18 11 - 14 4 - 10 <4 °TH 65 - 75 51 - 64 40 - 50 33 - 39 26 - 32 19 - 25 7 - 18 <7 mmol/l 6, 5 - 7, 5 5, 1 - 6, 4 4, 0 - 5, 0 3, 3 - 3, 9 2, 6 - 3, 2 1, 9 - 2, 5 0, 7 - 1, 8 < 0, 7 Clarke 46 - 52 36 - 45 28 - 35 23 - 27 18 - 22 13 - 17 5 - 12 <5 Water hardness adjustment manually 21) 21) 21) 21) 1 1 1 12) electronically 8 7 6 51) 4 3 2 12) 1) Factory position. 2) No use of salt is necessary. You must adjust the water softener manually and electronically. Manual adjustment Turn the water hardness dial to the position 1 or 2 (refer to the chart). Electronic adjustment 1. Some detergent tablets do not have the best cleaning results during short washing programmes. Use long washing programmes when you use the detergent tablets to fully remove the detergent. Use of rinse aid Rinse aid makes it possible to dry the dishes without streaks and stains. The rinse aid dispenser automatically adds rinse aid during the last rinsing phase. Do these steps to fill the rinse aid dispenser: 1. Press the release button 6 to open the lid 5 of the rinse aid dispenser. Fill the rinse aid dispenser 3 with rinse aid. The mark 'max' shows the maximum level. Remove the spilled rinse aid with an absorbent cloth to prevent too much foam during the washing programme. Press the lid until it locks into position. Adjust the rinse aid dosage Factory set: position 3. ­ Make sure that water does not collect in the container or in a deep base. ­ Make sure that cutlery and dishes do not bond together. ­ Make sure that the glasses do not touch other glasses. ­ Put small objects in the cutlery basket. ­ Mix the spoons with other cutlery to prevent them from bonding together. ­ Arrange the items to let water touch all surfaces. · Plastic items and pans with non-stick coatings can retain the water droplets. · Put light items in the upper basket. Make sure that the items do not move. WASHING PROGRAMMES Washing programmes Programme AUTO 45°-70°1) Degree of soil Any Type of load Crockery, cutlery, pots and pans Programme description Prewash Main wash 45°C or 70°C 1 or 2 middle rinses Last rinse Dry Prewash Main wash 70°C 1 middle rinse Last rinse Dry Main wash 60°C Rinse Prewash Main wash up to 50°C 1 intermediate rinse Final rinse Drying INTENSIV PRO 70° Heavy soil Crockery, cutlery, pots and pans 30 MIN 60°2) ECO 50°3) Normal or light soil Normal soil Crockery and cutlery Crockery and cutlery 14 Select and start a washing programme Programme Degree of soil Normal or light soil Type of load Programme description Delicate crockery and Main wash 45°C glassware 1 middle rinse Last rinse Dry Not fully load. 1 cold rinse (to prevent the remaining food to bond). Detergent is not necessary with this programme. [. . . ] ­ The programme indicator light above function button B continues to flash. ­ The display shows the current set. Rinse aid dispenser deactivated Rinse aid dispenser activated 6. ­ The display shows the new adjustment. Switch off the appliance to keep the operation. TECHNICAL DATA Dimensions Width Height Depth Water supply pressure Water supply 1) Capacity Minimum Maximum Cold water or hot water Place settings 596 mm 850 mm 625 mm 0, 5 bar (0, 05 MPa) 8 bar (0, 8 MPa) maximum 60 °C 12 1) Connect the water inlet hose to a water tap with a 3/4'' thread. The rating plate on the inner edge of the appliance door shows the electrical connection data. [. . . ]