User manual ATLINKS TEMPORIS 700

[. . . ] Mute mode active / On hold Telephone locked Missed calls Plug the mm holes 70 into right-hand socket under Fit set wall plugs and insert wood screws* (3. 5 mm in the two and into the wall socket. Mount the base on the 2 right-hand by pulling it Plug the telephone cord into screws socket under downwards. PROBLEM CAUSE The telephone is not properly connected. [. . . ] However, if the legal warranty applicable in your country exceeds twelve (12) months, the legal warranty alone then applies. However, if the legal warranty is less than twelve (12) months, the total period of the warranty (legal and commercial) will be of twelve (12) months. The faulty part or product will be repaired or replaced free of charge with an identical part or product or an equivalent or better one in terms of functionality and performance. if it proves impossible to repair or replace the item , you will be refunded for the product. Products and spare parts - which may be either new or refurbished - are guaranteed either for three months from the date of repair or until the end of the initial warranty period, whichever is the longer. Products and parts that have been returned and replaced become the property of the manufacturer. However, this warranty does not apply in the following cases: Storing names and numbers in the phonebook Once the headset is connected: To take an incoming call If you are talking to somebody on the handset, and you want to hear and talk to them over the loudspeaker instead: To change this, press Confirm by pressing To cut the ringer, select 0, and confirm by pressing Enter the name, using the keypad (see Section 4. Key to change a mistyped letter or digit before you save. After the call, press Press 4 The people around you can join in the conversation. Lift the handset to return to private conversation mode. And dial the number, or press one of the memory keys. Enter the first letter, or the first two letters, of the name you are looking for. 8 You can, at any moment, switch the call into: Handset mode: pick up the handset and remove the headset to hear your correspondent. The phonebook can hold up to 170 name and number entries and 10 quick-dial memory entries. Each entry can hold up to 20 digits and 16 characters. Using the phonebook to make a call Press until you reach the desired language (Français, Deutsch, Nederlands, Português, Italiano, English, Español) Confirm the chosen language with . Installation or use in a way which fails to comply with the instructions contained in this guide; incorrect connection or non-standard use of the product, notably with accessories not designed for the purpose; normal wear; failure to observe the technical and safety standards in force in the country of use; appliances subjected to shocks or falls; devices damaged by lightning, voltage surge, heat sources or radiation therefrom, water, exposure to excessive humidity, or any other cause external to the product itself; negligence or poor maintenance; maintenance or repair of the product by persons not authorized by the manufacturer or reseller. Your headset must have an RJ9 connector. Use headsets that comply with the EN 60950-1 standard and which are designed to be connected to telephones. Enter the new name and press Enter the first letter, or the first two letters, of the name you are looking for. The first name starting with that letter appears. Date: Using the number keys, enter the day followed by the month (e. [. . . ] There are two ways of redialling a recently called number: Off-hook mode Proceed in the same way for the other 2 keys: Service A, Service B. Your TEMPORIS 700 has a four-line display: 1 line of icons and function data, and 3 lines of 16 alphanumeric characters each New calls / Total calls Mute mode active / On hold Telephone locked Missed calls Repeat indicator Voicemail indicator Entry number in phonebook If a problem arises with a telephone connected in parallel If the display indicates "Busy Line", then the telephone connected in parallel is not on line: Or to scroll through the last 10 numbers dialled. Enter the desired number, using the keypad. To dial a number stored on one of these 3 keys Or pick up the handset or press the hands-free key Locking the keypad can prevent unwarranted calls being made. [. . . ]