User manual AUDIO ANALOGUE MAESTRO REV 1.3A

[. . . ] Dear Audiophile, Congratulations and thank you for choosing Maestro CD 192/24. You're now the owner of a unit that establishes a new reference in the category of high-quality and high-versatility stereophonic products. maestro CD 192/24 provides circuital solutions with no compromises and features capable to satisfy advanced users' demands. We built our CD player with high-performance circuits, 192kHz/24 bit D/A conversion system, function-based and channel-based circuit sections, PC and house-automation systems connection, high-contrast VFD display, optimized output for maximum sound transparency and quality. [. . . ] When pressing this button during playback, you activate fast rewind search. rS-232 serial port IEC standard power inlet. If necessary, replace them with others of the same kind (see back panel). By pressing this button, you start CD playback or interrupt/resume CD playback (pause). By pressing this button, you stop CD playback or open/close CD tray. By pressing this button during playback, you move to the previous CD track or, holding it down for a few seconds, activate fast rewind search. When playback is stopped, you may choose the CD track from which resuming playback or search CD tracks backward. By pressing this button during playback, you move to the next CD track or, holding it down for a few seconds, activate fast forward search. When playback is stopped, you may choose the CD track from which resuming playback or search CD tracks forward. This button has two different functions, according to the CD player status. When the CD player is on STOP mode, you may press it together with PREV/NEXT button to skip 10 tracks forward/backward. Just press the 10+ button again to deactivate this function. When pressing this button during CD playback, you may set playback time display: time elapsed since the beginning of the present track ("TIME"), track time left ("TRACK END") or disc time left ("REMAIN"). By pressing this button, you activate/deactivate standby mode. This button has two different functions, according to the CD player status. When the CD player is on STOP mode, you may choose to repeat a single track or the whole disc by pressing this button one or more times. select the track to be repeated by pressing PREV/NEXT buttons. By pressing this button at two different times during CD playback, you mark the beginning (A) and ending (B) point of a disk section to be repeated. When this function is selected, you may deselect it just pressing RPT button again and the disc will play normally. If one of the items listed above is missing, please contact your Audio Analogue retailer. After extracting the smallest items from the package, pull out the unit carefully. Where to place Maestro CD 192/24 Maestro CD 192/24 is a unit that may generate heat. [. . . ] You may remotely control the CD player connecting it to a PC or a home-automation unit through this port. This feature allows you to integrate Maestro CD 192/24 into a multi-room or houseautomation system and enjoy its sound everywhere in your house. Description Toggles the Fast Forward feature when the unit is in play. All of our CD players may not be able to read some specific CD's manufactured with a unique protection system against copying. [. . . ]