User manual AUDIO RESEARCH AR-VT130

[. . . ] • When positioning the display, make sure the power plug and outlet are easily accessible. • When turning off the display by detaching the power cord, wait 6 seconds before re-attaching the power cord for normal operation. • Ensure the use of an approved power cord provided by Philips at all times. If your power cord is missing, please contact your local service center. [. . . ] • Normal - The picture is reproduced in 4:3 format and a black band is displayed on either side of the picture. • Dynamic - Fill the entire screen by stretching 4:3 pictures non-proportionally. • Custom - Choose to apply the custom zoom settings in the Custom zoom submenu. Note: This mode does not support deinterlacing. The screen may flicker when displaying interlaced video. • Real - This mode displays the image pixel-by-pixel on screen without scaling the original image size. RETURN TO THE CONTENTS User Manual AR-VT130 • 21:9 - The picture is enlarged to 21:9 format. This mode is recommended when displaying pictures that have black bands at the top and bottom (letterbox format). Note: This mode does not support deinterlacing. The screen may flicker when displaying interlaced video. Custom zoom Note: This item is only available when Zoom mode is set to Custom. Note: If you unplug the power cord and re-plug within 7 seconds, the display will not work under the selected setting. Use this function to automatically optimize the VGA image within the display. Power save Set the display to reduce the power consumption. Use the UP/DOWN button to toggle between • PC - Select On to let the display enter DPMS (Display Power Management Signaling) mode when no signal can be detected from the HDMI, DVI-D, and VGA inputs after three successive cycles. Use the PLUS/ MINUS button to make selection. • Video - Select On to let the display enter power saving mode when no signal is detected from the Component input after three successive cycles. Use the PLUS/MINUS button to make your selection. Language Select the language for the OSD menu. Use the UP/DOWN button to select a language. Panel saving Choose to enable the panel saving functions to reduce the risk of the "image persistence”. Use the UP/ DOWN button to toggle between • Brightness - Select On and the brightness of the image will be reduced to an appropriate level, and the Brightness setting in the Picture menu will become unavailable. [. . . ] • Do not scratch or hit the cabinet with fingers or hard objects of any kind. • Do not use volatile substances such as sprays, solvents and thinners on the cabinet. • Do not place anything made from rubber or PVC near the cabinet for any extended periods of time. RETURN TO THE CONTENTS User Manual AR-VT130 7. 2. TROUBLESHOOTING Symptom No picture is displayed Possible Cause 1. [. . . ]