User manual AUDIOLINE BABYCARE V100

[. . . ] The devices are not intended for medical purposes. Warning and signal tones from respiratory or heartbeat monitoring equipment are not transmitted. The installation location plays a decisive role in ensuring proper operation. Therefore, maintain a distance of at least one meter from other electronic equipment, such as microwave ovens or hi-fi devices, otherwise they could cause mutual interference/faults. [. . . ] The rechargeable battery pack can be recharged directly in the receiver when it is inserted in the charging station. The Power LED lights up red when the receiver is being charged. in the case of a low battery charge , the Power LED flashes slowly. The battery pack must then be recharged. Using the belt clip/support You can use the belt clip/support as a belt clip by turning it upwards. When tuned downwards, it can be used as a support to keep it in a standing position. Check the transmitter and receiver are working properly each time before the equipment is put into operation. Switching the transmitter on/off Position the transmitter in a good position for the monitoring tasks required and align the camera lens to the area to be monitored. In this event replace the 4 x AAA batteries with fresh alkaline cells. Connecting and aligning the transmitter Attention: Position the transmitter with a minimum distance of 1 m to other electronic devices, otherwise there is a risk of mutual disturbance. Point the upper section of the transmitter towards the baby or object you want to monitor. check that the baby or object is suitably displayed on the receiver. Night vision The transmitter is equipped with 4 infrared diodes. This enables the transmission of pictures from areas which are not illuminated. The night vision function is activated automatically when the light conditions make it necessary. When the night-time vision function is activated, the screen display on the receiver turns to black and white. Check the transmitter and receiver are working properly each time before the equipment is put into operation. Switching the receiver on/off Press and hold this button until you hear 2 acoustic signals. The logo appears first then the image being taken by the transmitter camera. This icon appears in the display for a few seconds. Use this button to adjust the brightness to one of five settings. This icon appears in the display for a few seconds. [. . . ] All deficiencies related to material or manufacturing errors within the period of guarantee will be redressed free of charge. Rights to claims under the terms of guarantee are annulled following tampering by the purchaser or third parties. Damage caused as the result of improper handling or operation, normal wear and tear, incorrect positioning or storage, improper connection or installation or Acts of God and other external influences are excluded from the terms of guarantee. in the case of complaints , we reserve the right to repair or replace defect parts or provide a replacement device. [. . . ]