User manual AUDIOLINE CDL450

[. . . ] Walkie-talkies can cause an unpleasant humming sound in hearing aids. No objects filled with liquids, such as vases, shall be placed on the apparatus. This device fulfils the requirements stipulated in the EU directives: - 1999/5/EU directive on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity. - 2005/32/EU directive "Energy-using products". [. . . ] A Caution: Do not charge the walkie-talkies with charging units from other As soon as the indicator flashes in the display and acoustic warning signals are issued, the battery pack needs to be recharged. For removing the belt clip insert your finger nail and pull up the belt clip latch away from the unit. While pulling the belt clip latch push up the belt clip as shown. For attaching the belt clip slide it into the slot until a "click" indicates that it is locked into it's position. Handset 1 Display 2 PTT button 3 Transmit ring tone 4 Up/Down Keys for changing channels and volume 5 Menu key 6 On/Off key 7 Connection socket for headset/ charger (not supplied) Display 1 Channel 2 Scan mode 3 Send 4 Receive 5 DCS activated (Advanced Digital Code) 6 CTCSS activated (sub channel) 7 Subchannel (CTCSS) 8 Displays 1/10 sec during stopwatch function 9 Call signal / vibrator function activated 10 Volume 11 VOX mode 12 Dual watch function activated 13 Key lock 14 Battery charge capacity 42 ct/min from mobile phone providers. For switching off the walkie-talkie press and hold down the On/Off button. 5 to 7 cm from your mouth and speak at a In order to talk to other subscribers, the respective walkie-talkies must be set to the same channel and CTCSS/DCS code. Radio signals cannot be received when the PTT button is being pressed. CTCSS: Continous Tone Coded Squelch System All the calls on walkie-talkies which occur within the range of reception are signalled. A condition for this is that all the walkie-talkies are set to the same channel. Note: CTCSS- and DCS-codes can only be used alternatively. The ringing tone indicates to other subscribers that you want to talk to them. A condition for this is that the other subscribers are using the same channel and CTCSS / DCS code. There are 10 ringing tones available for selection. You can select whether a call should be signalled by the ring ton, the vibrator or both ringtone and vibrator. The Roger Beep is a tone which is automatically transmitted whenever the PTT button is released. This alerts the receiving party to inform that you have intentionally ended the transmission, and you are now in receive mode. This feature allows the PMR to emit a confirmation tone after pressing each button. With the dual watch mode activated two channels of your choice are watched alternately. If a signal on one of these channels is detected the dual watch mode is interrupted and you can take part in the communication on this channel. For deactivating the Dual Watch Mode press the menu key 12 times, select "OF" and press the PTT button. The Key Lock feature allows user to disable the keys , and the menu key so that the PMR settings could not be changed accidentally. [. . . ] Talk time Charging time Battery pack Power supply Value 0. Maintenance Clean the housing surfaces with a soft, fluff-free cloth. The terms of guarantee do not apply to the batteries or power packs used in the products. The period of guarantee is 24 months from the date of purchase. [. . . ]