User manual AUDIOLINE SPRINT182

[. . . ] Entering phone numbers in the phone book . Dialling phone numbers stored in the phone book . Deleting stored entries from the phone book . Deleting all entries from the phone book . [. . . ] Press: 1 x button /, 2 x button §, 1 x button (, 2 x button §, 3 x button / S To enter a space, press 1 once. S To enter the same letter twice, press the button to enter the letter. wait until the cursor skips one place forward. S Delete any incorrect entries with the button. 3 ©, G ©, O Entering phone numbers in the phone book Enter the phone number (max. 123456789 O Conform the phone number again 5. 4 Dialling phone numbers stored in the phone book G, - or . , Select the phone book entry and dial the number 5. 5 Editing entries in the phone book G , - or . , G Select the phone book entry and press the phone book button , ©, O Edit the name and confirm , ©, O Edit the phone number and confirm 5. 6 Deleting stored entries from the phone book G, - or . 7 Deleting all entries from the phone book G, 2 sec Open the phone book and press the Delete button ALLE?If this function is provided by your telephone service, the number of the caller appears in the display when the telephone rings. If the caller's number is stored in the phone book, the name appears in the display instead of the phone number. If the caller has suppressed transmission of their phone number, the message PRIVAT appears in the display. , Open the calls list, select the phone number required and press the Delete button LOESCH?The button on the handset is used in private branch exchanges and for taking advantage of T-Net functions provided by Deutsche Telekom. 1 R button on private branch exchanges If the telephone is connected to a private branch exchange, all the functions linked to the button, such as transferring calls, automatic call back, etc. The dealer where you purchased the exchange can provide information as to whether the telephone will work properly with the exchange. 3 Entering a dialling pause In the case of private branch exchanges, it is necessary to dial a specific number (e. 9" or 0 ) in order to obtain the dialling tone for an outside line. When using some older private branch exchanges, it takes a little time before the dialling tone becomes audible. [. . . ] No telephone charges are necessary because no connection has been made. Should problems arise with the telephone, refer to the following information. In the case of technical problems, contact our Hotline, tel. There is a 2 year period of guarantee Faults - No connection to base station possible - There is no dialling tone - The telephone does not signal calls Corrective measures - The handset is too far from the base station. [. . . ]