User manual AUDIOLINE TEL 50 SOS

[. . . ] The telephone is suitable for telephoning within a public telephone network system. Any other use is considered unintended use. unauthorised modification or reconstruction is not permitted. Under no circumstances open the device or complete any repair work yourself. [. . . ] If the telephone is connected to a private branch exchange, functions such as transferring calls and automatic call back can be used via the R button. Please refer to the operating manual supplied with your private branch exchange to determine which recall (Flash) time must be set in order to use these functions. The dealer where you purchased the exchange can provide information as to whether the telephone will work properly with the exchange. In the case of private branch exchanges, it is necessary to enter an access code to get an outside line with its corresponding dialling tone. When using some older private branch exchanges, it takes a little time before the dialling tone becomes audible. Particularly in the case of such private branch exchanges, it is possible to insert a dialling pause after the number for the outside line so that the number can be dialled in a continuous process without having to wait for the dialling tone. £ Insert a dialling pause After dialling the number for the outside line, the telephone then waits approx. 3 seconds before dialling the actual phone number. The pause can also be entered with the phone number in the phone book. Your telephone supports the supplementary services offered by your telephone network provider, such as brokering, call waiting and conference calls. The supplementary services can be used in conjunction with the R button. Please contact your telephone network provider regarding which recall time must be set to use the supplementary services. Please contact the telephone network provider with regard to enabling the supplementary services. Caller number display (CLIP1) 10 If this function is available with your telephone line, the number of the caller appears in the display when the phone rings. If the caller has suppressed transmission of his phone number, a corresponding message appears in the display. The phone number is not displayed and, as a result, is not stored in the calls list. The caller number display function is an optional service offered by telephone network providers. Contact your network provider for further information. Page 28 explains how to navigate and make entries in the main menu. This voice can be activated Thirty phone numbers can be stored in the phone book together with the associated names. S Always enter the area access code with the phone numbers so that the telephone can also assign incoming local calls to a phone book entry. S When the memory capacity of the phone book is used up, the message MEMORY FULL appears when an attempt is made to store another number. [. . . ] Should problems arise with the telephone, please refer to the following information first. In the case of technical problems, contact our Service Hotline, tel. Problems No telephone calls possible Reply - The telephone line is not connected properly or is defective. Only use the telephone connection cable supplied. [. . . ]