User manual AUDIOLINE TEL38

[. . . ] Storing telephone numbers in the phone book. 30 Deleting individual numbers from the phone book. 31 Dialling and storing telephone numbers when using on private exchanges . Batteries Do not use any other kind of rechargeable batteries, as these could possibly lead to a short circuit. [. . . ] Is no longer displayed, the time of day must be changed over from winter to summer time. As soon as the cursor is flashing on the first digit, you can enter the current hour. Enter the current hour by repeatedly pressing the . The cursor will jump to the minutes Confirm with the Delete button display. Enter the current minutes by repeatedly pressing the Confirm with the Delete button . Enter the current day by repeatedly pressing the . Enter the current month by repeatedly pressing the . Entry is now complete and the current Confirm with the Delete button time and date will be shown in the display. Note: If the batteries have become completely discharged, it will be necessary to re-enter the time and date. Making a call using the receiver or handsfree feature The AUDIOLINE 38 telephone can be used like any conventional telephone and, in addition, has some useful special features, which make phoning considerably easier for you. You have two ways of making a call: A: Making a call using the receiver 1. Lift the receiver and wait until you hear a dialling tone. The display can show a telephone number with a maximum of 16 digits. If the number dialled is longer than this, only the last 16 digits will be displayed. If you want to change during a call from the receiver to the handsfree facility, press the button and replace the receiver on the rest. You will hear the dialling tone from the in-built loudspeaker. The display can show a telephone number with a maximum of 16 digits. If the number dialled is longer than this, only the last 16 digits will be displayed. If the other party accepts the call, his voice will be heard over the in-built loudspeaker. When using the handsfree facility always speak loudly and clearly towards the telephone. The volume can be adjusted using the handsfree button. If you want to change from the handsfree facility to the receiver, simply lift the receiver. [. . . ] Entering the pause when dialling manually Press the redial button once between the code for the outside line and the actual telephone number. After an outside line has been obtained, you telephone will wait for 3 seconds before dialling the actual telephone number. Storing the pause with the number Simply press the redial button after the code for the outside line and before the actual telephone number when storing the number. When dialling from the phone book, a pause of three seconds will then be automatically inserted after the code for the outside line. [. . . ]