User manual AUDIOLINE TEL6

[. . . ] Due to the large number of different private exchanges, it is not possible to guarantee this function. Disposal - If the useful life of the complete equipment has expired, please dispose of it carefully in accordance with the statutory requirements and in a manner friendly to the environment. CE mark - The telephone complies with the basic requirements of the R&TTE Directive This is confirmed by the CE mark. - General Information Temperature and ambient conditions - The telephone is designed for use in protected rooms with a temperature range of 10 °C to 30 °C. [. . . ] Drill two holes horizontally side by side, 83 mm apart, and leave the screws protruding from the wall by 5mm. Now place the telephone over the screws and push it slightly downwards. If you are using the telephone fitted to the wall, you can hang the receiver on the telephone without hanging up. You will find a small hook for this purpose at the upper end of the receiver rest. Adjustable ring tone By means of the slide switch you can choose the settings (loud) or (soft) to match the volume of the ringing tone to your requirements. If at any time you do not want to be disturbed, use the setting (off). You can switch off the microphone during a call using the mute button, . It is thus possible to speak without the other party hearing you. The loudspeaker remains switched on and you can continue to hear the other party. To mute the microphone, press and hold the mute button once while a call is being made. To switch the microphone on again, release the mute button and you will be able to continue your call as normal. - Operation Making a call using the speed dial buttons Now press the required storage location between 0 and 9 on the keypad. The stored number will now be dialled automatically. Please contact DEUTSCHE TELEKOM to gain access to these functions (some of which are subject to charge). When using T-NET functions, move the slide switch on the right side to the "300ms" position. Dialling telephone numbers when using on private exchanges With private exchanges, it is necessary to dial a certain number (e. "9" or "0") in order to obtain a dialling tone for an outside line on the extension. With some, older private exchanges, it takes some time before the dialling tone can be heard. Especially for these private exchanges, an automatic pause can be inserted after connecting to the outside line so that you can dial directly without waiting for the dialling tone. Press the redial button once between the number for the outside line and the actual telephone number. After connecting to an outside line your telephone will wait for 3 seconds before dialling the actual telephone number. You can store the pause under the speed dial buttons. [. . . ] For the complete Declaration of Conformity, please use the free download from our web site www. You can use the "R" signal button on your telephone on private exchanges and when using DEUTSCHE TELEKOM's T-Net functions. Private exchanges - If you have connected your telephone to a private exchange, you can use all the facilities such as call transfer, automatic recall, etc. The "R" signal button gives you access to these facilities. [. . . ]