User manual AUDIOLINE WAVE 18X ECO

[. . . ] Always keep a cord connected telephone which operates without an external power supply available in case of emergency situations. Attention: Never use the telephone in the vicinity of medical equipment. effects on such equipment cannot be fully ruled out. 1 telephones can cause an unpleasant humming sound in hearing DECT aids. [. . . ] The caller number display function is an optional service offered by telephone network providers. If this service is not offered, the incoming calls are not displayed. Contact your network provider for further information. Displaying numbers in the call log Storing an entry in the call log in the phone number memory Y, y/z, several times if necessary ®, ADD ?Deleting phone numbers from the call log Take a call (off-hook) End a call (on-hook) Make an external call Redial the number , ë or ë, £, y/z, or , £ Dial from calls log Dial from phone number memory Internal calls 11 Making an internal call There must be two or more handsets registered on the base station in order to make internal calls. Forwarding external calls internally / Conference calls After the internal party has answered, transfer the call by pressing the button. To start a conference call, wait for the party called to answer the internal call and then press the # button. If the handset called does not answer, take the external call back by pressing the I button. Function Switch the handset on /off Key lock on Key lock off Receiver volume Ringing melody volume Muting/Activating microphone in handset Locate handset (paging) Button sequence 5 sec R 3 sec * *, * , y/z y/z while phone is ringing during the call on the base station After muting the microphone, the caller can no longer hear you. The duration of a call is displayed in hours, minutes and seconds during the call. If your handset is not registered on the base station, icons flash in the display. To register the handset, press the button on the base station for five seconds and then proceed as follows: ®, y/z, REGISTER , ®, REG BASE , ®, BASE 1 2 3 4 . To register a handset from a different manufacturer, refer to the operating manual supplied with the respective handset. the four-digit PIN for your base station is 0000. Up to five handsets can be registered on your base station. However, you can only activate your handset on one base station at a time. When the memory capacity for new messages is exhausted, no further messages are recorded. To play new messages recorded, proceed as follows: ®, ®, y/z, NEW MSG- 01 , ® To play all the messages recorded, proceed as follows: ®, ®, y/z, ALL MSG- 03 , ® To open the answering machine's main menu, proceed as follows (pay attention to the audio operating instructions): ®, y/z, TAM SETTINGS , ®, y/z, Function Display text Button sequence ®, y/z, ® Taking a call being recorded If the answering machine has taken an incoming call, press the button to take the call personally. outgoing message menu 12 To open the OGM Setting menu , proceed as follows: ® , y/z , TAM SETTINGS , ® , y/z , OGM SETTING , ® , y/z , Outgoing messages (OGM) can be recorded or deleted. After OGM 1 has been played, the caller can leave a message. OGM 2 is purely an answer only announcement after which no message can be left. You can select from 2 to 9 ringing tones or the TS (Time Saver) setting for pre-remote access free of charge. [. . . ] All deficiencies related to material or manufacturing errors within the period of guarantee will be redressed free of charge. Rights to claims under the terms of guarantee are annulled following tampering by the purchaser or third parties. Damage caused as the result of improper handling or operation, incorrect positioning or storage, improper connection or installation or Acts of God and other external influences are excluded from the terms of guarantee. In the case of complaints, we reserve the right to repair defect parts, replace them or replace the entire device. [. . . ]