User manual AUDIOVOX AVP-8200

[. . . ] VIDEO CASSETTE PLAYER MODEL AVP-8200 OPERATING INSTRUCTIONS Thank you for purchasing the Audiovox Model AVP-8200 Video Cassette Player. This instrument is listed by Underwriter's Laboratories, Inc. It is designed and manufactured to meet rigid U. L. safety standards against X-radiation, fire, casualty and electrical hazards. Audiovox Electronics Corporation 150 Marcus Blvd. , Hauppauge, NY 11788 (128-6418) CAUTIONS AND WARNINGS To obtain the best results and to avoid malfunctions, PLEASE READ CAREFULLY THE DESCRIPTIONS AND OPERATING PROCEDURES CONTAINED IN THIS OWNER'S MANUAL PRIOR TO OPERATING THE VIDEO CASSETTE PLAYER. This user manual employs the following symbols to indicate different types of warning messages. Indicates a warning or notice regarding product operation. [. . . ] Reduces picture "jitter" during play-pause mode. Use these buttons to select AV1 and AV2 when the VCP is in any mode other than play. When VCP is in play mode, AV1 and AV2 are overridden by VCP playback and these buttons adjust tracking only. 1 Auto Repeat Button The VCP cycles through the following mode and the indicator lights orange. The tape will play to the end, rewind to the beginning and play again. When this function is enabled, all control functions are disabled. 2 AUDIO/VIDEO IN Jacks Connect these jacks to the audio/video out jacks terminal of your Game machine or Camcorder using the RCA cord provided. 9 CONTROLS AND INDICATORS (CONTINUED) REAR PANEL !Infrared (IR) INPUT Connector This connector provides a two-wire interface with various Audiovox IR products such as VOH-681/682. (P/N 136B1864) * Connector description @ DC 12V Jack When using a DC power source, connect this jack to 12V DC. * Connector description 10 CONTROLS AND INDICATORS (CONTINUED) # AUDIO/VIDEO OUT Connectors These connectors provide an interface to the AUDIO/VIDEO IN connectors of your video monitor, using an RCA cord. $ AUDIO/VIDEO IN Connector These connectors provide an interface to the AUDIO/VIDEO OUT connectors of your Game machine or Camcorder using an RCA cord. % Infrared (IR) INPUT Connector (3. 5mm jack) This connector provides a three-wire interface with receiver accessory. (P/N 136-B2129) CAUTION: This VCP is for 12Vdc use only; DO NOT use in 24Vdc vehicles. If you use this unit in a 24Vdc vehicle, all the indicator lamps will blink indicating a major malfunction. Disconnect the plug from the power source immediately. 11 CONTROLS AND INDICATORS (CONTINUED) REMOTE CONTROL Turns the VCP on and off. Use this button to eject the cassette tape from the VCP. In STOP mode use this button to select between Video 1 and Video 2 inputs. In PLAY mode use this button to adjust the tracking. In STOP mode use this button to rewind the tape. In PLAY mode use this button to view the tape in reverse. In STOP mode use this button to start tape play. In PLAY mode use this button to enable the Auto Tracking function. In STOP mode use this button to fast forward. [. . . ] · Poor connection between VCP output and TV input. · Shorted coax cable between VCP and TV. POSSIBLE SOLUTIONS · Switch to TV mode. · Change connections from A/V output to A/V input. · Check connector between VCP and TV. · Check connection(a). · Check cable/by pass or continuity test. [. . . ]