User manual AUDIOVOX CE101B

[. . . ] SKIP + Press lightly / repeatedly : To locate the beginning of next selection / selections. Keep depressed : To go ahead at high speed (search). PROG (Program) Playing the selections in the desired order. PLAY MODE Button for selecting the various play mode. [. . . ] First track playing begins. CAUTION INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCKS DEFEATED. AVOID EXPOSURE TO BEAM. · During playback (batteries are in use), " " is off. · When the battery voltage level is low, " " will light for approx. 10 ~ 15 minutes, playback still continues in this period. · Playback would automatically come to a stop when the batteries have no more power. Do not repeat pressing " " as the unit may operate incorrectly. Replace all the batteries with new ones. ·" " would not be on if an AC adaptor is used. During play The track number of the current selection appears. When " " is press during play, total number of tracks on the disc will be displayed and the unit still on. If " " is pressed again the unit will be returned to full stop mode. If " " is pressed the unit returns to play mode. The unit will be returned to full stop mode automatically after approximately 30 seconds if no button is played again within 30 seconds. Using on house current If the unit you purchased does not include an AC power adaptor, please use a 6V 350mA AC power adaptor. Plus pole " " to the centre pin of the 3. 5mm socket. When the unit is not be used, be sure to disconnect the AC power adaptor. During pause The playing track number will flashes. PRECAUTION On safety As the laser beam used in this compact disc player is harmful to the eyes, do not attempt to disassemble the casing. Refer servicing to qualified personnel only. Do not put any foreign objects in the safety slot inside the disc compartment. If you do so, the laser beam may come out when the lid is opened. Do not put any foreign objects in the DC in 6V (external power input) jack. Should any solid objects or liquid fall into the unit, disconnect the power supply and have the unit checked by qualified personnel before operating it any further. When no disc is inserted onto the player and when " " is pressed, the display window shows " ". The unit cannot be operated when error message is displayed. 30 seconds the unit will return to full stop mode, or reset the player by pressing " " once and then insert a disc start playing. On operation Since the CD system offers a wide dynamic range, the peaks of the high level inputs are recorded with high fidelity, and the noise level is very low. Do not turn up the volume while listening to a part of the disc with no audio signals or very low level inputs. [. . . ] * "INTRO" play always starts from the first track. SPECIFICATIONS General Output (at 1KHz 0db level) Headphones / earphone (stereo minijack) 15 mW + 15mW at 16 to 32 Power requirements 2 size "AA" (LR6 or SUM-3) alkaline batteries; or DC in 6V, 350mA power adaptor Polarity of plug Dimensions Weight Operating voltage Approx. 225g (not include batteries) U. S. A. , CANADA MIDDLE EAST and AUSTRALIA UK and GERMANY CHILE SINGAPORE, MALAYSIA & THAILAND JAPAN MAINTENANCE SHUFFLE PLAY - Playing the selections in random order 1. Press "PLAY MODE" during play until "SHUFF" flashes in the display window. Cleaning the unit Do not use volatile chemicals on this unit. Clean by lightly wiping with a soft cloth. Cleaning CD If the CD skips or will not play, the disc may need to be cleaned. [. . . ]