User manual AUDIOVOX CE550DV

[. . . ] SAFETY PRECAUTIONS The following mark and symbols are located on the bottom of the unit. The lightning flash with an arrowhead symbol, within the equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to cause an electric shock. The exclamation point within the equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in this owner manual. RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION AVIS WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. [. . . ] This unit automatically recognizes DVDs that have been recorded with Dolby Digital. Not all Dolby Digital sources are recorded with 6 channels. Some sources marked Dolby Digital may be recorded in Dolby Surround, a 2 channel system. Look for this logo on your unit. Manufactured under license from Dolby Laboratories. 'Dolby' and the double-D symbol are registered trademarks of Dolby Laboratories. 15 DVD CD Basic playback PLAYING A DISC This owner's manual explains the basic instructions of this unit. Some DVD discs are produced in a manner that allows specific or limited operation during playback. As such, the unit may not respond to all operating commands. Refer to the instruction notes of discs. " " may appear on the screen during operation. A " " means that the desired operation is not permitted by the unit or disc. Playing a Disc 1. Press the STD. BY/ON button on the unit or press the STANDBY/ON button on the remote control to turn on the unit. Press the FUNCTION button to select the DVD mode. See CUSTOMIZING THE FUNCTION SETTINGS (page 27 to 29) before proceeding to step 3. Hold the disc by its sides and carefully make it fit onto the central support of compartment with the printed side facing towards you until you hear a "click". It takes a short while for your unit to load the disc. After loading, for some discs, the unit will automatically start playing most discs. If the disc does not start automatically, press the NOTE: With its printed side facing outward, gently push the disc onto the center pivot until it clicks and is held in place securely. Pausing playback (still mode) Press the PAUSE button to hold still of a playing disc. To resume normal playback, press the PLAY button. Stopping playback Press the STOP button at the location where you want to interrupt playback. To resume playback at the position where the disc was stopped, press the PLAY button again. If you press the STOP button twice, the unit's memory will be cleared and pressing the PLAY button will reset the disc to the beginning. To skip to a different track Press the PREV button on the remote once to skip to the start of the previous track. Press the NEXT button on the remote to skip to the next track. For audio CD disc, use the number buttons (remote control only) to jump straight to the desired track number. 16 (continued on next page) DVD CD Basic playback PLAYING A DISC DVD CD The speed of fast scan Fast Forward/Fast Reverse or button when a disc is playing. [. . . ] Press the PLAY button to return to normal play mode. Make sure that AUDIO / VIDEO output connections are correct. The DTS DVD disc cannot be decoded to have speaker output. This unit is too hot, shut off the unit for 30 minutes to cool down. [. . . ]